1991 Fiat Panda

Front Both front shock absorber gaiters split

Front Inner Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt Both sides (2.1.3 (g) (i))

Lower Integral body structure is corroded but structural rigidity is not significantly reduced Both lower inner sills rusty (6.1.1 (c) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Play in steering rack inner joint(s)

Rear Exhaust mounting defective Rubber mounting split (6.1.2 (a))

Rear Lower Shock absorbers has a slightly worn bush Both sides (5.3.2 (c))

Rear Rear exhaust system rusty

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Front Both front shock absorber gaiters split

Front Inner Suspension arm pin or bush worn but not resulting in excessive movement Both sides (5.3.4 (a) (i))

Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt Both sides (2.1.3 (g) (i))

Lower Integral body structure is corroded but structural rigidity is not significantly reduced Both lower inner sills rusty (6.1.1 (c) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Play in steering rack inner joint(s)

Rear Exhaust mounting defective Rubber mounting split (6.1.2 (a))

Rear Lower Shock absorbers has a slightly worn bush Both sides (5.3.2 (c))

Rear Rear exhaust system rusty

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement both nearside and offside (5.3.4 (a) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Registration plate deteriorated but not likely to be misread front and rear (0.1 (b))

both nearside and offside inner sills getting rusty

both nearside and offside shock dust covers fallen to bits

Central Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Horn not working (7.7 (a))

Central Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Lower Coolant leak

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Offside Headlamp aim too high (4.1.2 (a))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Rear registration plate insecure (6.3.1b)

Registration plate lamp not illuminating the registration plate (1.1.C.1e)