MOT Status
ExpiredMileage
155,702 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Brake pipe excessively corroded front to rear corred (1.1.11 (c))
Central Front Windscreen washer not working (3.5 (a))
Central Fuel pipe insecure front to pump no clips (6.1.3 (a) (i))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Suspension arm has an unsafe modification bottom arm has two cuts but not welded (5.3.3 (c) (i))
Central Brake pipe inadequately clipped or supported front to rear no clips (1.1.11 (d) (i))
Central Fuel Pipe/s corroded all fuel pipes corred to the piont about to leak
Central Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Upper dust cover has sealant covering the joint
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Brake hose slightly chafed chafing on shock on hard lock (1.1.12 (b) (i))
Offside Front Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Upper dust cover has selant covering the ball joint
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive Suspension arm mounting points on subframe (5.3.6 (a) (i))
Offside Rear Lower Suspension arm damaged but not seriously weakened (5.3.3 (b) (i))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive Suspension arm mounting points on subframe (5.3.6 (a) (i))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced Rear upper suspension arm mounting areas thin (6.1.1 (c) (i))
Suspension arm corroded but not seriously weakened All front suspension arms (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened All rear suspension arms (5.3.3 (b) (i))
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Steering locking device missing Track rod end (2.1.3 (d))
Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Windscreen washer not working (3.5 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive Suspension arm mounting points on subframe (5.3.6 (a) (i))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Lower Suspension arm damaged but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive Suspension arm mounting points on subframe (5.3.6 (a) (i))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced Rear upper suspension arm mounting areas thin (6.1.1 (c) (i))
Suspension arm corroded but not seriously weakened All front suspension arms (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened All rear suspension arms (5.3.3 (b) (i))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Brake pipe corroded, covered in grease or other material central (1.1.11 (c))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i))
Brake pipe corroded, covered in grease or other material central (1.1.11 (c))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Bushes starting to detoriate (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement Both sides starting to detoriate (5.3.4 (a) (i))
Brake performance not tested Due to leaking connection at n/s/r brake caliper (1.2.1 (g))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Exhaust has a major leak of exhaust gases Joint between front and mid section (6.1.2 (a))
Exhaust has a major leak of exhaust gases Mid silencer (6.1.2 (a))
Nearside Front Body panel corroded and likely to cause injury Wing (6.2.1 (a) (i))
Nearside Rear Hydraulic brake calliper insecurely mounted Loose (1.1.16 (c) (i))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill holed (7.1.1 (a) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Holed (7.1.1 (a) (i))
Nearside Rear Brake hose connection leaking on a hydraulic braking system Connection to brake caliper (1.1.12 (c) (ii)) DANGEROUS
Front Registration plate insecure but not likely to fall off (0.1 (a))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Bushes starting to detoriate (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement Both sides starting to detoriate (5.3.4 (a) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Box section holed in 2 places (6.2.2 (d) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
oil leak
oil leak
oil leak
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Oil leak
Play in steering rack inner joint(s)
Vehicle structure has slight corrosion (6.1.A.1)
coil spring corroded (2.4.C.1b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
coil spring corroded (2.4.C.1b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Body has slight corrosion (6.1.B.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front coil spring corroded (2.4.C.1b)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Rear Exhaust has part of the system excessively deteriorated (7.1.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front coil spring corroded (2.4.C.1b)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front coil spring corroded (2.4.C.1b)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside front and back brake pipes covered in grees.
Brake pedal anti-slip provision incomplete (3.3.A.1b)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp aim too low (1.8)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp aim too low (1.8)
Power steering pipe(s) or hose(s) leaking (2.3.3b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Offside Front coil spring fractured (2.4.C.1a)
Offside Rear coil spring fractured (2.4.C.1a)
Nearside Rear Body has slight corrosion (6.1.B.2)
Offside Rear Body has slight corrosion (6.1.B.2)
brake pipes are corroded
Offside Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2)
How Reliable is the Mazda MX-5?
Based on 2,502,760 MOT tests across 160,823 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
H231 XMX is a 1990 Mazda MX-5 in Blue with a 1,597cc petrol engine. This vehicle has been through 30 MOT tests with a personal pass rate of 56.7%.
Across all 1990 Mazda MX-5 models, the average MOT pass rate is 68.2% with a typical mileage of 116,196 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MX-5 fails its MOT is seat belt anchorage prescribed area is excessively corroded, accounting for 44,475 recorded failures. If you're considering buying H231 XMX, it's worth having these areas checked by a mechanic before committing.
The Mazda MX-5 typically stays on UK roads for around 36 years. At 36 years old, this Mazda MX-5 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of H231 XMX?
You can check the full history of H231 XMX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was H231 XMX registered?
H231 XMX is a 1990 Mazda MX-5, first registered on 1 August 1990.
Is H231 XMX safe to buy?
The MOT history for H231 XMX shows 30 tests with a 56.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does H231 XMX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on H231 XMX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.