1991 Fiat Ducato

both front inner wing panels corroded

both sides front brake reaction bushes splitting and worn

both sides front outriggers starting to corrode

engine and transmission oil leaks

exhaust rubbers splitting

general corrosion to front and rear suspension areas

n/s front brake pipe under outrigger corroded in clip

rear no/plate faded

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear brake binding (3.7.B.1)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear brake binding (3.7.B.1)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

both front inner wing panels corroded

both sides front brake reaction bushes splitting and worn

both sides front outriggers starting to corrode

engine and transmission oil leaks

exhaust rubbers splitting

general corrosion to front and rear suspension areas

n/s front brake pipe under outrigger corroded in clip

rear no/plate faded

both front brake reation bar front bushes splitting and perished

both front inner wings at front corroded

main brake pipe corroded in front clip

n/s front outrigger starting to corrode

transmission oil leak

Brake load sensing valve seized (3.6.E.3)

Nearside Headlamp aim too high (1.8)

Nearside rear brake binding (3.7.B.1)

Offside Headlamp aim too high (1.8)

Offside rear brake binding (3.7.B.1)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

both front brake reation bar front bushes splitting and perished

both front inner wings at front corroded

main brake pipe corroded in front clip

n/s front outrigger starting to corrode

transmission oil leak

all exhaust rubbers splitting

altenator light on

both front inner wings starting to corrode

both front shocker covers deteriarated

both front tie bar bushes splitting

engine and transmission oil leak

general corrosion to front suspension

handbrake cable outer covers splitting

oil filter corroded

rear no/plate faded

Brake load sensing valve seized (3.6.E.3)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

altenator light on

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

all exhaust rubbers splitting

both front inner wings starting to corrode

both front shocker covers deteriarated

both front tie bar bushes splitting

engine and transmission oil leak

general corrosion to front suspension

handbrake cable outer covers splitting

oil filter corroded

rear no/plate faded

slight bind in both rear hubs

body under both front arches corroding

brake load sensing valve slow but working

exhaust system corroding

oil filter corroded

slight corrosion on front torear brake pipe

slight play in nearside rear wheel bearing

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front coil spring corroded (2.4.C.1b)

engine transmission oil leaks

exhaust rubber mounting rings splitting

front number plate broken

Nearside Front coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

engine oil leaks/transmission leaks

exhaust rubber mounts poor

front number plate cracked

handbrake cables outer casings

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Headlamp aim too low (1.8)

Nearside Headlamp insecure (1.7.3)

Offside Headlamp aim too low (1.8)

Nearside Front coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

engine oil leaks/transmission leaks

exhaust rubber mountings

front number plate cracked

handbrake cables outer casings

Rear Leaf spring has a slightly deteriorated anchor pin rubber bush not resulting in excessive movement (2.4.B.2)

o/s/f inner wheel arch starting to corrode

Brake load sensing valve linkage seized (3.6.E.3)

Exhaust mounting missing (7.1.1b)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Side repeater not working (1.4.A.2c)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Rear Leaf spring has a slightly deteriorated anchor pin rubber bush not resulting in excessive movement (2.4.B.2)

o/s/f inner wheel arch starting to corrode

bushes worn both rear leaf springs

Centre Exhaust has part of the system excessively deteriorated (7.1.1a)

Centre Exhaust mounting missing (7.1.1b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear Brake pipe leaking (3.6.A.1)

Offside Headlamp aim too high (1.8)

Nearside Rear Leaf spring has slight wear in an anchor pin and/or bush (2.4.B.2)

rear exhaust mounts perished

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Headlamp aim too high (hotspot upper edge above the horizontal 0% line) (1.6.D1)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear wheel bearing has slight play (2.6.2)