1991 Volkswagen Taro

Nearside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Emissions not tested (8.2.1.2 (d))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))

Emissions not tested due to running rich (8.2.1.2 (d))

Front Service brake imbalanced across an axle (1.2.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front mounting (5.3.6 (a) (i))

Offside Front Anti-roll bar insecurely attached end link (5.3.3 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front mounting (5.3.6 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Bonnet primary retaining device insecure (3.1 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Bonnet primary retaining device insecure (3.1 (c))

Front Service brake excessively binding (1.2.1 (f))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Fuel tank leaking (7.2.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Shock absorber has a slightly worn bush (2.7.4)

Front front brake fluctuating, but not excessively (3.7.B.3)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)

Rear Shock absorber has a slightly worn bush (2.7.4)

exhaust corroded

o/s front head lamp deteriorated

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Shock absorber has a slightly worn bush (2.7.4)

Front Shock absorber has slight corrosion to the casing (2.7.2a)

Front Suspension arm slightly distorted (2.4.G.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front front brake fluctuating, but not excessively (3.7.B.3)

Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)

Rear Leaf spring has a slightly deteriorated shackle pin rubber bush not resulting in excessive movement (2.4.B.2)

Rear Shock absorber has a slightly worn bush (2.7.4)

Rear Shock absorber has slight corrosion to the casing (2.7.2a)

exhaust corroded

n/s o/s front chassis body mountings corroded to excess

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Suspension arm slightly distorted (2.4.G.1)

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Vehicle structure has slight corrosion (6.1.B.2)

Rear Brake pipe slightly damaged (2.2.D.2b)

Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)

Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Vehicle structure has slight corrosion (6.1.B.2)

front nuber plate loose

rear brakes binding slightly

under side corroded

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Suspension arm slightly distorted (2.4.G.1)

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Vehicle structure has slight corrosion (6.1.B.2)

Rear Brake pipe slightly damaged (2.2.D.2b)

Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Vehicle structure has slight corrosion (6.1.B.2)

front nuber plate loose

rear brakes binding slightly

under side corroded

Brakes imbalanced across an axle (3.7.B.5b)

Offside Headlamp insecure (1.7.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside front, offside front and nearside rear tyres all badly cracked on walls and treads.

Headlamp reflectors corroded but still giving good light.

Headlamp reflectors starting to rust, but not affecting beam image.

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Corroded areas are inside faces of both chassis.

Nearside Front position lamp(s) not working (1.1.A.3b)

rear brake application uneven (3.7.B.2)