MOT Status
ValidMileage
126,586 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Fuel cap/sealing device ineffective Not Opening (6.1.3 (b) (i))
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. Rear Brakes Service & Handbrake (1.2.1 (b) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Drive shaft joint constant velocity boot severely deteriorated Deep Cut (6.1.7 (g) (i))
Rear Exhaust mounting defective Both Rear (6.1.2 (a))
Driver's view to the front outside the swept area of the windscreen wipers restricted by an obstruction sticker (3.1 (a) (i))
Items removed from driver's view prior to test ()
Nearside Rear Child Seat fitted not allowing full inspection of adult belt poorly fitted ()
Position lamp slightly affected by the operation of another lamp both rear (4.2.3 (c))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Driver's view to the front outside the swept area of the windscreen wipers restricted by an obstruction sticker (3.1 (a) (i))
Items removed from driver's view prior to test ()
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Rear Child Seat fitted not allowing full inspection of adult belt poorly fitted ()
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp aim too far to the right (4.1.2 (a))
Position lamp slightly affected by the operation of another lamp both rear (4.2.3 (c))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Sub-frame insecurely attached bolts missing (5.3.3 (a) (i))
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))
Fuel cap/sealing device ineffective (6.1.3 (b) (i))
Hazard warning switch inoperative (4.4.2 (a) (ii))
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Exhaust emissions hydrocarbon content excessive (7.3.B.1b)
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too high (1.8)
How Reliable is the Peugeot 309?
Based on 93,983 MOT tests across 21,848 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
H311 CNC is a 1990 Peugeot 309 in Red with a 1,905cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 64.3%.
Across all 1990 Peugeot 309 models, the average MOT pass rate is 64.2% with a typical mileage of 98,192 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Peugeot 309 fails its MOT is brake pipe excessively corroded, accounting for 5,920 recorded failures. If you're considering buying H311 CNC, it's worth having these areas checked by a mechanic before committing.
The Peugeot 309 typically stays on UK roads for around 40 years. At 36 years old, this Peugeot 309 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of H311 CNC?
You can check the full history of H311 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was H311 CNC registered?
H311 CNC is a 1990 Peugeot 309, first registered on 3 August 1990.
Is H311 CNC safe to buy?
The MOT history for H311 CNC shows 14 tests with a 64.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does H311 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on H311 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.