1990 Citroen C25

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake hose has slight corrosion to ferrule Both front hoses (1.1.12 (f) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Surface corrosion to underbody

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake hose has slight corrosion to ferrule Both front hoses (1.1.12 (f) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Surface corrosion to underbody

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Some surface corrosion to outer sill sections

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Steering linkage ball joint ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Tie bar rubbers deteriorated

Nearside Rear Some corrosion to outer sill section

Offside Front Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tie bar rubbers deteriorated

Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear slight corrosion osr wing

Nearside Headlamp aim projected beam image is obviously incorrect kick up (4.1.2 (c))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Electrical wiring insecure and connectors likely to become disconnected battery area (4.11 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect kick up (4.1.2 (c))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Brake load sensing valve inoperative and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Both headlamps have "kick up" masked out. Incorrect headlamps fitted

Nearside Headlamp aim so that beam "kick up" is not visible on the screen Kick up to right (4.1.2 (a))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Headlamp insecure (4.1.1 (c))

Nearside Stop lamp(s) light intensity significantly reduced (4.3.3 (a) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt not fixed (6.1.7 (g) (ii))

Offside Headlamp aim so that beam "kick up" is not visible on the screen kick up to right (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Offside Headlamp insecure (4.1.1 (c))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

nearside and offside rear sils not adequately repaired but not structural

Exhaust system not adequately supported (7.1.1)

nearside and offside rear sils not adequately repaired but not structural

Battery insecure (1.9.1)

Front position lamp(s) adversely affected by the operation of another lamp do not light simultaneously (1.1.A.3f)

Nearside Headlamp aim too low (1.8)

Nearside Headlamp insecure (1.7.3)

Nearside Rear Body has a sharp edge caused by corrosion outer sill (6.1.C.1)

Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded shock absorber (2.4.A.3)

Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded shock absorber mount (2.4.A.3)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Front Inner Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded in arch (2.4.A.3)

Offside Rear Body has a sharp edge caused by corrosion outer sill (6.1.C.1)

Offside Rear Upper Suspension component mounting prescribed area is excessively corroded shock absorber mount (2.4.A.3)

Offside rear brake binding (3.7.B.1)

Registration plate lamp not working (1.1.C.1d)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front coil spring corroded both sides (2.4.C.1b)

Offside Front inner arch rotten with corrosion covered in underseal

Oil leak ()

Rear Shock absorber has slight external damage to the casing (2.7.2a)

Rear coil spring corroded both sides (2.4.C.1b)

engine noisy

most front suspension bushes perish deterioated

multiple points of corrosion to underside & components

underside corrosion disguised with underseal

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

both front jacking points corroded

both reat tyres perished

exhaust system missing 2 rings but adaquetly supporting

Service brake: efficiency below requirements (3.7.B.7)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

both front jacking points corroded

both reat tyres perished

exhaust system missing 2 rings but adaquetly supporting

Nearside Front coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Oil leak

plastic cover in engine bay rubbing on PAS belts/pulley

Brake load sensing valve seized (3.6.E.3)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Headlamp aim too low (1.8)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside rear brake binding (3.7.B.1)

Trailer electrical socket deteriorated so that lead cannot be securely connected (1.9.3b)

Nearside Front coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Oil leak

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

plastic cover in engine bay rubbing on PAS belts/pulley

front brake discs excessively corroded

nearside front tyre clearly under inflated

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Passenger's seat insecure (6.2.A.1)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Side repeater not working (1.4.A.2c)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

front lower ball joint rubbers split

n/s/r lower body under bumper corroded

wiper linkage excessively worn

Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear Brake pipe slightly corroded (3.6.B.2c)

front lower ball joint rubbers split

Exhaust has part of the system slightly deteriorated (7.1.1a)

Exhaust system not adequately supported (7.1.1)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Rear Brake pipe slightly corroded (3.6.B.2c)

Registration plate lamp not working (1.1.C.1d)

front lower ball joint rubbers split

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Registration plate lamp not working (1.1.C.1d)

Oil leak

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Rear Registration plate lamp not working (1.1.5c)

poor repair made to o/s rear crossmember

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Rear Rear fog lamp not working (1.3.2b)

Rear Registration plate lamp not working (1.1.5c)

exhaust poor condition

long parking brake lever travle

noise from steering rack

rear spring bushes poor condition

rear springs poor

Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Front Side repeater not working (1.4.A.2c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Front Side repeater not working (1.4.A.2c)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Brake load sensing valve linkage seized (3.6.E.3)

Rear Brake valve leaking (3.6.A.1)

Rear Registration plate lamp not working (1.1.C.1d)

CORROSION REAR

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)