1991 Rover Mini

Bonnet primary retaining device insecure (3.1 (c))

Windscreen washer not working (3.5 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor within 12 inches of subframe mounting (5.3.6 (a) (i))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive gear selector leaking (8.4.1 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive gear selector leaking (8.4.1 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Nearside Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Nearside Rear Stop lamp(s) light intensity significantly reduced (4.3.3 (a) (ii))

Nearside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Outer Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Offside Rear Stop lamp(s) light intensity significantly reduced (4.3.3 (a) (ii))

Offside Front tyre bald on inside edge

Hazard warning lamps inoperative (1.4.B.1b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Steering column top mounting bracket insecure (2.1.2d)

Nearside Front tyre bald on inner edge

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear position lamp(s) has a product on the lens so it is not visible from a reasonable distance (1.1.A.3d)

Offside Stop lamp has a product on the lens so it is not visible from a reasonable distance (1.2.1d)

Nearside Front tyre bald on inner edge

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Inner Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Steering rack gaiter split (2.2.D.2d)

Rear Stop lamp not working (1.2.1b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Stop lamp not working (1.2.1b)

Nearside Track rod end loose (2.2.B.1d)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Stop lamp not working (1.2.1b)

Offside Track rod end loose (2.2.B.1d)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Steering column retaining device insecure (2.1.6)