1990 Mercedes-benz Sprinter

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Steering box has slight free play detected at steering wheel (2.3 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Steering box has slight free play detected at steering wheel (2.3 (a) (i))

corrosion to offside front step not within 12" of seatbelt or suspension mount at time of test.

misting of fluid offside rear brake drum.

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Rear Service brake excessively binding (1.2.1 (f))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Steering box drop arm likely to become detached (2.1.3 (a) (ii)) DANGEROUS

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Oil leak, but not excessive diff (8.4.1 (a) (i))

Offside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Oil leak, but not excessive diff (8.4.1 (a) (i))

Exhaust system insecure (6.1.2 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Oil leak, but not excessive diff (8.4.1 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front both tyres wearing on inner edges

Offside door step holed out with prescribed area

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Front both tyres wearing on inner edges

Offside door step holed out with prescribed area

Nearside Headlamp aim too low (1.8)

Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded bulkhead (3.6.C.3)

Offside Headlamp aim beam image obviously incorrect reflector insecure (1.8.A.1b)

Offside Rear Direction indicator excessively damaged so that it is not visible from a reasonable distance (1.4.A.2e)

Offside Rear position lamp(s) not working (1.1.A.3b)

o/s doorstep holed - outwith prescribed areas

o/s n/s front brake pipes covered in thick grease

Centre Front Exhaust has a minor leak of exhaust gases (7.1.2)

o/s front bulk head corroded slightly

o/s n/s front brake pipes covered in grease

Brake load sensing valve seized (3.6.E.3)

Brake pedal spongy (3.3.B.1b)

Emissions not tested (7.0)

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3) DANGEROUS

Offside Front Front wheel bearing has slight play (2.5.A.3c)

rear body panels mounted to the chassis are corroded and insecure

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)

Front Headlamp aim too low (1.8)

Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front All position lamps not working (1.1.A.3b)

Offside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Rear fog lamp not working (1.3.2b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

both front brake discs starting to corrode

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

front crossmember surface corrosion

Centre Exhaust system not adequately supported (7.1.1)

Centre Front Brake cable has a seized clevis joint pivot (3.5.1c)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Exhaust has a part missing (7.1.1a)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

front crossmember surface corrosion

Brake load sensing valve linkage seized (3.6.E.3)

Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)

Emissions not tested (7.0)

Nearside Headlamp insecure (1.7.3)

Rear Exhaust has a part missing (7.1.1a)

Rear Exhaust system not adequately supported (7.1.1)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Front brake disc slightly pitted (3.5.1h)

Offside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Offside Front brake disc slightly pitted (3.5.1h)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Shock absorber has a slightly reduced damping effect (2.7.5)

Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

all suspension bushes perrished but no excess movement

bulk head on nearside non prescribed area

n/s/f & both rear tyre cracking but not to cords or plys

Steering system has slight free play detected at steering wheel (2.2.A.1a)

all tyres perrished but no to cords or plys

corrosion o/s/f arch

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)