1991 Rover Mini

Nearside Seat belt affected by an insecure seat fixing (5.2.1b)

Offside Headlamp aim too low (1.8)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Nearside Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear wheel bearing has excessive play (2.6.2)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Brake cable has a seized clevis joint pivot (3.5.1c)

Offside Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Offside Headlamp aim too low (1.8)

Offside Rear fog lamp not working (1.3.2b)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Steering rack insecure (2.2.B.1a)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

both front inner wings poor with corrosion

filler and repairs evident on both sills /door steps

o/s/f outer sill corroded

odd size tyres front to rear

play evident in top engine mount

serious amount of repairs and deterioration throughout whole vehicle structure

sills covered and body kit covering testable items

Nearside Rear Front wheel bearing has slight play (2.5.A.3c)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2)

Nearside Side repeater not working (1.4.A.2c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Steering system has slight free play detected at steering wheel (2.2.A.1b)

Exhaust system not adequately supported (7.1.1)

Front Brake pipe kinked (3.6.B.2b)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Nearside Headlamp aim too low when the centre of the headlamp is above 850mm from the ground (1.6.B3)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Headlamp aim too low when the centre of the headlamp is above 850mm from the ground (1.6.B3)

Offside Rear Shock absorber has negligible damping effect (2.7.5)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Rear fog lamp not working (1.3.2b)

Service brake: efficiency below requirements (3.7.B.7)

Steering column top bearing excessively worn (2.1.2c)

Steering system has slight free play detected at steering wheel (2.2.A.1b)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Nearside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Rear Rear passenger seat cannot be secured in the upright position. (6.2.3)