1990 Mazda MX-5

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Direction indicator missing (4.4.1 (a) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Position lamp missing (4.2.1 (a) (ii))

Offside Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor rail (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

both rear lower outer panels corroded/repaired

oil dampness at engine/gearbox

some underbody corrosion

Nearside Front Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

oil leaks around gearbox

sill panels have been plated

Nearside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

oil leaks around gearbox

sill panels have been plated

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

nearside parking brake effort low

oil around gearbox

sill panels have been plated/repaired/corrosion

offside front link rod bush deteriorating

sill panels have been plated

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

nearside handbrake effort a bit low

sill panels have been repaired-patched

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

underside and suspension components corroding

Nearside Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sills (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both forward chassis rails under floorpans (5.3.6 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

underside and suspension components corroding

Nearside Outer corroded areas forming on body sill

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Outer corroded areas forming on body sill

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

corrosion forming on underside components and lower body

corrosion forming on underside and components

oil leak

weld repairs to vehicle

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

oil leak

weld repairs to vehicle

Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

The battery is insecure.

The near side front damper gaitor is split.

The near side rear damper gaitor is split.

The off side front damper gaitor is split.

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Registration plate lamp not working (1.1.5c)

Offside Seat belt locking mechanism does not secure or release (5.2.5a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)