1999 Skoda Felicia

Front Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Fuel Pipe/s corroded ()

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Fuel Pipe/s corroded ()

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Headlamp aim too low (4.1.2 (a))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Central Exhaust has a major leak of exhaust gases (7.1.2)

Central Rear Suspension component mounting prescribed area is excessively corroded floor panel (2.4.A.3)

Nearside Headlamp aim too low (1.8)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Suspension component mounting prescribed area is excessively corroded floor panel (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Headlamp aim too low (1.8)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Suspension component mounting prescribed area is excessively corroded floor panel (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Rear Brake pipe slightly corroded (3.6.B.2c)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Headlamp aim too low (1.8)

Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Front Headlamp aim too low (1.8)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Brake hose slightly deteriorated offside and nearside front (3.6.B.4d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Direction indicator incorrect colour front and rear (1.4.A.2f)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust system not adequately supported (7.1.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Road wheel bead rim badly distorted (4.2.A.1a)

Brake hose slightly deteriorated offside and nearside front (3.6.B.4d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Headlamp aim too low (1.8)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Front Headlamp aim too low (1.8)

Rear Brake pipe excessively corroded (3.6.B.2c)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Brakes imbalanced across an axle (3.7.B.5b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Headlamp aim too low (1.8)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Offside Front Headlamp aim too low (1.8)

Windscreen washer provides insufficient washer liquid (8.2.3)

Exhaust has a minor leak of exhaust gases (7.1.2)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Front position lamp(s) not working (1.1.A.3b)