1991 Mazda MX-5

All Front suspension components showing signs of corrosion

All Rear suspension components showing signs of corrosion

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 29% (3.7.B.5b)

Fuel pipe slightly damaged pipes corroded near to fixings front to rear x2 (7.2.2)

Nearside Front Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

Nearside Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Nearside Rear Lower Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Inner Vehicle structure has slight corrosion sill and chassis areas (6.1.B.2)

Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement upper and lower (2.4.G.2)

Nearside Rear Upper Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside front brake binding (3.7.B.1)

All Front suspension components showing signs of corrosion

All Rear suspension components showing signs of corrosion

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 29% (3.7.B.5b)

Nearside Front Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

Nearside Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Nearside Rear Lower Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Inner Vehicle structure has slight corrosion sill and chassis areas (6.1.B.2)

Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement upper and lower (2.4.G.2)

Handbrake efficiency only just passed 16%

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake imbalance only just passed 30%

Brake pedal anti-slip provision incomplete (3.3.A.1b)

Nearside Rear Brakes imbalanced across an axle (3.7.B.5b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Handbrake efficiency only just passed 16%

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake imbalance only just passed 30%

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brakes imbalanced across an axle (3.7.B.5b)

Offside Front coil spring fractured (2.4.C.1a)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Offside Front Shock absorber has a light misting of oil (2.7.3)

Rear brake disc slightly pitted (3.5.1h)

Nearside Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Rear brake disc slightly pitted (3.5.1h)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Inner Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Offside Rear coil spring fractured (2.4.C.1a)