2003 Nissan Figaro

Bumper damaged and likely to cause injury when grazed or contacted REAR (6.1.4 (a) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust system insecure FRONT HANGER BROKEN (6.1.2 (a))

Fluid leak harmful to the environment or a risk to other road users FUEL LEAK AT FILLER NECK (8.4.1 (a) (i))

Horn not working (7.7 (a) (ii))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILL TO FLOOR PAN (6.1.1 (c) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced AT ANCHOR POINT (7.1.1 (a) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILL (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WHEEL ARCH AT ROADWHEEL (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced OUTER SILL (6.1.1 (c) (i))

Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced MAIN CHASSIS LEG AT EXHAUST HANGER (6.1.1 (a) (i))

Steering system excessively rough (2.1.1 (a))

ADVISORY FLOOR AND CHASSIS IN ADVANCED STATE OF CORROSION

Brake pad(s) wearing thin FRONT (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside rear brake fluctuating, but not excessively (3.7.B.3)

Power steering component(s) has slight seepage from a component (2.3.3b)

front brake fluctuating, but not excessively both (3.7.B.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis at bumper (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded main chassis at bumper holed (2.4.A.3)

Rear Suspension component mounting prescribed area is excessively corroded floor area holed at (2.4.A.3)

Offside rear brake fluctuating, but not excessively (3.7.B.3)

Power steering component(s) has slight seepage from a component (2.3.3b)

front brake fluctuating, but not excessively both (3.7.B.3)

Power steering component(s) has slight seepage from a component (2.3.3b)

various holes outwith prescribed areas

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Seat belt anchorage prescribed area is excessively corroded outersill at (5.2.6)

Offside Suspension component mounting prescribed area is excessively corroded floor at (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded boot holed at (2.4.A.3)

Power steering component(s) has slight seepage from a component (2.3.3b)

various holes outwith prescribed areas

Nearside Front coil spring broken (2.4.C.1a)

Rear Rear fog lamp missing (1.3.2a)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside rear sill holed but not within 30cm of suspension or seatbelt

Nearside sill holed but not within 30cm of suspension

Offside sill holed but not within 30cm of suspension

Offside sill holed but not within 30cm of suspension or seatbelt

Play in steering rack inner joint(s)

Nearside Front brake caliper leaking (3.6.A.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

front brake application uneven (3.7.B.2)

Exhasut back box not fitted with rubbers but is rigidly fixed to body

N/S track rod end is not fitted with a locking nut or split pin.

n/s/f tyre cracks on shoulders

o/s/r tyre cracks on shouder

Both front tyres have crackes on sidewall.

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Oil leak

Trims on all wheels unable to fully check brake pads.

Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Front Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)