MOT Status
ExpiredMileage
77,574 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Front coil spring corroded (2.4.C.1b)
Nearside and offside sill lips corroded
Parking brake lever has little reserve travel (3.1.6b)
Rear coil spring corroded (2.4.C.1b)
Underbody and suspension corroded
Front coil spring corroded (2.4.C.1b)
Rear coil spring corroded (2.4.C.1b)
Rear suspension bushes perishing
Some under body surface corrosion
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Front coil spring corroded (2.4.C.1b)
Nearside Headlamp aim too low and too far to the left. (1.8)
Offside Headlamp aim too far to the left (1.8)
Rear coil spring corroded (2.4.C.1b)
Rear suspension bushes perishing
Some under body surface corrosion
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear coil spring corroded (2.4.C.1b)
Oil leak
Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)
Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear coil spring corroded (2.4.C.1b)
Oil leak
Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)
Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
under side of body corroded
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
under side of body corroded
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Oil leak
vehicle underside covered in surface corrosion
Offside Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Oil leak
vehicle underside covered in surface corrosion
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Parking brake: efficiency below requirements (3.7.B.7)
How Reliable is the Mazda 626?
Based on 311,592 MOT tests across 41,549 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
H58 WCD is a 1990 Mazda 626 in Grey with a 1,998cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 50%.
Across all 1990 Mazda 626 models, the average MOT pass rate is 64.1% with a typical mileage of 102,344 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 626 fails its MOT is parking brake: efficiency below requirements, accounting for 25,332 recorded failures. If you're considering buying H58 WCD, it's worth having these areas checked by a mechanic before committing.
The Mazda 626 typically stays on UK roads for around 37 years. At 36 years old, this Mazda 626 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of H58 WCD?
You can check the full history of H58 WCD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was H58 WCD registered?
H58 WCD is a 1990 Mazda 626, first registered on 3 August 1990.
Is H58 WCD safe to buy?
The MOT history for H58 WCD shows 14 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does H58 WCD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on H58 WCD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.