1990 Honda CBR600F

All direction indicators not working (4.4.1 (a) (ii))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Rear Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Rear Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Tyre worn close to the legal limit (5.2.3 (e))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Nearside Front Shock absorber has negligible damping effect (5.3.2 (b))

Offside Front Shock absorber has negligible damping effect (5.3.2 (b))

Offside Rear Exhaust system insecure (6.1.2 (a))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Riders seat insecure (6.2.5 (a) (ii)) DANGEROUS

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Nearside Front Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Offside Front Brake disc contaminated (1.1.14 (b))

Offside Front Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Offside Front Upper PANEL DAMAGED

Offside Rear Upper PANEL INSECURE

Front Clutch security nut missing.

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Throttle operating incorrectly Throttle sticking (6.2.7 (a) (i))

Front Clutch security nut missing.

Rear Brake disc worn, but not excessively also has fine cracks, recommend a new disc (1.1.14 (a) (i))

rear slider boots split and non standard locking clips in calliper pins

Front Brake disc contaminated (1.1.14 (b))

Front Brake excessively binding cannot check wheel bearings due seized brake. (1.2.1 (f))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake excessively binding (1.2.1 (f))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Rear reflector missing (4.8.2 (a) (ii))

Offside Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Offside Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear reflector on motorcycle missing (1.4.1)

Front Front shock absorber seal failed and leaking oil (2.3.3) DANGEROUS

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Rear Motorcycle structure slightly corroded (6.1.1a)

Steering headbearing has slight free play (2.2.2)