MOT Status
ExpiredMileage
135,060 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Rear Sub-frame repaired, but not inappropriately (2.4.A.2)
Front registration plate deteriorated (6.3.1d)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Fluid suspension unit leaking (2.4.D.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front position lamp(s) insecure (1.1.A.3a)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Registration plate lamp not working (1.1.C.1d)
Rear Sub-frame repaired, but not inappropriately (2.4.A.2)
Horn not working (1.6.2a)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Fluid suspension unit leaking (2.4.D.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
o/s/f sill corrosion
o/s/r tyre worn on inner edge
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Steering rack gaiter split (2.2.D.2d)
Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Fluid suspension unit leaking (2.4.D.2)
Nearside Rear Sub-frame corroded and seriously weakened (2.4.G.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
o/s/f sill corrosion
o/s/r tyre worn on inner edge
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
o/s/r tyre worn on inner edge
Nearside Rear Fluid suspension unit leaking (2.4.D.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
o/s/r tyre worn on inner edge
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
o/s/r tyre worn on inner edge
Front Fluid suspension unit leaking (2.4.D.2)
Nearside Front Steering rack gaiter split (2.2.D.2d)
Nearside Rear Radius arm has excessive play in a pin/bearing (2.4.G.2)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside front parking brake recording little or no effort (3.7.B.6a)
Offside Front Steering rack gaiter split (2.2.D.2d)
Offside Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
o/s/r tyre worn on inner edge
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
o/s/f sill corrosion not structural
o/s/f tyre cracking on side walls
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Side repeater not working (1.4.A.2c)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
o/s/f tyre cracking on side walls
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
n/s/f tyre cracking on side walls
Nearside Front Steering rack gaiter split (2.2.D.2d)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
n/s/f tyre cracking on side walls
Nearside Steering rack gaiter insecure (2.2.D.2d)
Offside Front Body insecure and dangerous to other road users (6.1.B.1b)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Corrosion o//s/r inner sill
N/s hand brake cable is in poor contition
O/s/r sub frame mounting is rusty
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear brake discs are worn
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Sub-frame corroded and seriously weakened (2.4.G.1)
Offside Front Fluid suspension pipe leaking (2.4.D.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Sub-frame corroded and seriously weakened (2.4.G.1)
Offside Rear fog lamp not working (1.3.2b)
Corrosion o//s/r inner sill
N/s hand brake cable is in poor contition
O/s/r sub frame mounting is rusty
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear brake discs are worn
n/s/r tyre is perished in tread.
ns outer sill corroded
osf bumper loose
osf tyre pressure low
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
n/s/r tyre is perished in tread.
Both sill are rusty.
both rear tyres are in poor condition.
suspension stiff †fluid leaks from suspension components †rear tyre walls are perished †handbrake cable outer covers in poor condition †
How Reliable is the Citroen Xm?
Based on 25,619 MOT tests across 4,589 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
H627 GDP is a 1990 Citroen Xm in Blue with a 1,998cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 54.5%.
Across all 1990 Citroen Xm models, the average MOT pass rate is 65.3% with a typical mileage of 106,252 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Citroen Xm fails its MOT is parking brake: efficiency below requirements, accounting for 1,359 recorded failures. If you're considering buying H627 GDP, it's worth having these areas checked by a mechanic before committing.
The Citroen Xm typically stays on UK roads for around 36 years. At 36 years old, this Citroen Xm is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of H627 GDP?
You can check the full history of H627 GDP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was H627 GDP registered?
H627 GDP is a 1990 Citroen Xm, first registered on 23 August 1990.
Is H627 GDP safe to buy?
The MOT history for H627 GDP shows 22 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does H627 GDP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on H627 GDP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.