1998 Toyota MR2

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Coolant leak ()

Exhaust emits excessive dense blue smoke during acceleration (7.3.A.2c)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Brake pedal anti-slip provision missing (3.3.A.1b)

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Nearside Headlamp aim too low (1.8)

Nearside Inner Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Offside Front Seat belt affected by an insecure seat fixing (5.2.1b)

Offside Headlamp aim too low (1.8)

Offside Inner Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear front brake binding (3.7.B.1)

Offside Rear front parking brake recording little or no effort (3.7.B.6a)

Steering wheel retaining device missing (2.1.6)

Nearside Front front brake recording little or no effort (3.7.B.5a) DANGEROUS

Offside Front front brake recording little or no effort (3.7.B.5a) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Service brake: efficiency below requirements (3.7.B.7) DANGEROUS

Battery insecure

Front brake disc slightly pitted (3.5.1h)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Inner Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Rear Tie bar/rod has slight play in a ball joint (2.4.G.2)

Rear brake disc slightly pitted (3.5.1h)

Offside Registration plate lamp not working (1.1.5c)

Steering column shaft has excessive end float (2.1.3)

Wheel nut(s) missing (4.2.A.1e)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust has part of the system excessively deteriorated (7.1.1a)

Horn not working (1.6.2a)

Nearside Steering column shaft has excessive end float (2.1.3)

Nearside rear brake binding (3.7.B.1)

Offside Front Road wheel bead rim badly distorted (4.2.A.1a)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Offside Side repeater not working (1.4.A.2c)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.5c)

Service brake: efficiency below requirements (3.7.B.7)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)