2001 Fiat Ducato

Brake pedal wearing smooth (1.1.2 (c))

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Indicator switch faulty (4.4.2 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Lamp Damaged

Rear Doors Damaged But Secure

Side Door Handle Broken

Emissions unable to be completed (8.2.2.2 (e))

Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Horn not working (7.7 (a))

Nearside Front Upper Macpherson strut mounting damaged and seriously weakened (5.3.3 (b) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Sill At Rear (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner Wheel Arch (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength In Wheel Arch (5.3.6 (a) (i))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Sill At Rear (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer Sill (5.3.6 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear fog lamp switch inoperative (4.5.3 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Brake pedal wearing smooth (1.1.2 (c))

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Indicator switch faulty (4.4.2 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Lamp Damaged

Rear Doors Damaged But Secure

Side Door Handle Broken

Brake pipe corroded, covered in grease or other material across rear beam (1.1.11 (c))

Brake pipe corroded, covered in grease or other material to the front flexis (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced front chassis (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced outrigger/jacking point (6.1.1 (c) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sills (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front inner wheel arches (5.3.6 (a) (i))

side door handle broken

Exhaust mounting defective Rubber hangers splitting (6.1.2 (a))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Exhaust mounting defective Rubber hangers splitting (6.1.2 (a))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material Across rear axle (1.1.11 (c))

Brake pipe corroded, covered in grease or other material Front to rear brake pipe (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing/arch (2.4.A.3)

Offside Front Plastic inner arch hanging but not fowling against road wheel

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Direction indicator not working (1.4.A.2c)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded quarter to outrigger (2.4.A.3)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded rear quarter to out rigger (2.4.A.3)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nail in nearside front tyre

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Passenger seat(s) missing at time of test

Horn not working (1.6.2a)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Stop lamp emits other than a steady red light (1.2.1e)

Nail in nearside front tyre

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Passenger seat(s) missing at time of test

Horn not working (1.6.2a)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Stop lamp emits other than a steady red light (1.2.1e)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear reflector missing (1.5.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pipe slightly corroded (3.6.B.2c)

passenger seats not fitted

Brake pipe slightly corroded (3.6.B.2c)

Nail in nearside front tyre

Nail in offside front tyre

Nearside Body has a sharp edge caused by damage (6.1.C.1)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear position lamp(s) incomplete (1.1.4a)

Nearside Stop lamp emits other than a steady red light (1.2.1e)