1990 Ford Transit

Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Vehicle structure is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached (6.1.6 (i) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Side repeater not working (4.4.1 (a) (ii))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Inner Tyre fouling a part of the vehicle (5.2.3 (f))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

CLUTCH PEDAL ANTISLIP PAD MISSING

Front Brake pad(s) wearing thin (3.5.1g)

battery insecure

Offside Seat belt has a cut which has significantly weakened the webbing (5.2.2a)

Service brake: efficiency below requirements (3.7.B.7)

battery insecure

Nearside Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)

Nearside Rear Stop lamp adversely affected by the operation of another lamp (1.2.1f)

Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Nearside Front Steering pivot point has excessive play (2.2.B.1g)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Steering pivot point has excessive play (2.2.B.1g)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

CORROSION HOLES ON OUTER SECTIONS OF FRONT X MEMBER

REAR NUMBER PLATE DISCOLOURING

REAR NUMBER SLIGHT DISCOLOURING

CORROSION HOLES IN BOTH SILLS

FRONT X MEMBER OUTER SECTIONS CORROSION HOLES UNDERNEATH

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Steering pivot point has slight play (2.2.B.1g)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)

Offside Front Steering pivot point has slight play (2.2.B.1g)

Nearside Front Axle beam has excessive vertical movement between stub axle and axle beam (2.5.A.1a)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Axle beam has excessive vertical movement between stub axle and axle beam (2.5.A.1a)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Inner Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

all wheel arches corrded