MOT Status
ExpiredMileage
233,308 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake performance not tested (1.2.1 (g))
Emissions not tested (8.2.1.2 (d))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Windscreen washer provides insufficient washer liquid (3.5 (a))
Front Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp aim too high (1.8)
Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp aim too high (1.8)
Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
driver side outer sill is corroded outside any prescribed area
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear brake disc excessively pitted (3.5.1h)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear fog lamp not working (1.3.2b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Headlamp aim too low (1.8)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp aim too low and too far to the right. (1.8)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Front registration plate character(s) not correctly formed (6.3.4b)
Offside Rear coil spring incomplete (2.4.C.1a)
Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Subframe mounting prescribed area is excessively corroded (2.4.A.3)
How Reliable is the Mazda MX-5?
Based on 2,502,760 MOT tests across 160,823 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
H76 XMY is a 1990 Mazda MX-5 in Blue with a 1,597cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 42.9%.
Across all 1990 Mazda MX-5 models, the average MOT pass rate is 68.2% with a typical mileage of 116,196 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MX-5 fails its MOT is seat belt anchorage prescribed area is excessively corroded, accounting for 44,475 recorded failures. If you're considering buying H76 XMY, it's worth having these areas checked by a mechanic before committing.
The Mazda MX-5 typically stays on UK roads for around 36 years. At 36 years old, this Mazda MX-5 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of H76 XMY?
You can check the full history of H76 XMY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was H76 XMY registered?
H76 XMY is a 1990 Mazda MX-5, first registered on 14 September 1990.
Is H76 XMY safe to buy?
The MOT history for H76 XMY shows 14 tests with a 42.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does H76 XMY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on H76 XMY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.