1990 Fiat Ducato

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Exhaust system insecure (6.1.2 (a))

Front Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Door step and door pillar (7.1.1 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect Headlamp condensated (4.1.2 (c))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Brake pipe excessively corroded Two pipes (1.1.11 (c))

Offside Front Outer Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Offside Headlamp aim too high (4.1.2 (a))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill front to rear (7.1.1 (a) (i))

Offside Rear Outer Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch and outer sill (5.3.6 (a) (i))

Position lamp switch insecure (4.2.2 (b))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Hazard warning switch insecure (4.4.2 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 30% (3.7.B.5b)

Steering system slightly tight (2.2.D.1)

Nearside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Suspension joint nearside lower dust cover split/missing

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Headlamp aim too far to the right (1.8)

Offside Headlamp aim too low (1.8)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front front brake juddering severely (3.7.A.2b)

Offside Front front brake juddering severely (3.7.A.2b)

Front brake disc slightly pitted (3.5.1h)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front brake disc slightly scored (3.5.1h)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Appears to be slight movement starting at O/S/F W/Bearing

B/Fluid level at resevior low

Corrosion hole at N/S/R end quater panel botton edge area by bumper end ( NOT yet within fail limits at time of test - BAORDER LINE )

O/S/R outer sill area getting abit corroded slightly

Rear spring shackle mount brackets getting corroded slightly