MOT Status
ExpiredMileage
139,360 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Track rod end ball joint has slight play (2.2.B.1f)
both rear chassis corrded
Front Exhaust has a major leak of exhaust gases (7.1.2)
Indicator switch faulty (1.4.A.1)
Nearside Front Front wheel bearing rough when rotated (2.5.A.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Stop lamp emits other than a steady red light (1.2.1e)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering (2.5.A.3a)
Offside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering (2.5.A.3a)
Offside Front Direction indicator not working (1.4.A.2c)
Offside Front Front wheel bearing rough when rotated (2.5.A.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Direction indicator not working (1.4.A.2c)
Service brake: efficiency below requirements (3.7.B.7)
oil leak
Lower Body has slight corrosion (6.1.B.2)
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Headlamp aim too low (1.8)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Side repeater not working (1.4.A.2c)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Rear fog lamp not working (1.3.2b)
Rear registration plate insecure (6.3.1b)
Registration plate lamp not working (1.1.C.1d)
Lower Body has slight corrosion (6.1.B.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Brake load sensing valve seized (3.6.E.3)
Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
Nearside Front Headlamp aim too low (1.8)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
NSF kingpin slight play
NSR tyre deteriated
Nail in nearside rear tyre
Nearside Front Track rod end ball joint has slight play (2.2.B.1f)
OSF kingpin slight play
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
oil on engine
Driver's door cannot be opened from outside the vehicle (6.2.B.1b)
Indicator switch faulty (1.4.A.1)
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Windscreen wiper not operating over a large enough area to give an adequate view (8.2.1c)
Parking brake lever has no reserve travel (3.1.6b)
Rear Brakes imbalanced across an axle (3.7.B.5b)
Offside Outer Body has slight corrosion (6.1.B.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Offside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)
Offside Front Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear reflector excessively damaged so that its function is impaired (1.5.1c)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Brake cable has wires broken and is significantly weakened (3.5.1b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Registration plate lamp insecure (1.1.C.1c)
Offside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)
Offside Front Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Rear Brake pipe slightly corroded (3.6.B.2c)
os mirror cracked but view to rear clear
osr bumper slight movement
underbonnet surface rust underbody surface rust and bodywork surface rust
Brake load sensing valve linkage seized (3.6.E.3)
Braking system leaking (3.6.A.1)
Emissions not tested (7.0)
Headlamp aim not tested (1.8.A.1c)
Nearside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Stop lamp emits other than a steady red light (1.2.1e)
Service brake: efficiency below requirements (3.7.B.7)
Rear Brake pipe slightly corroded (3.6.B.2c)
brake fluid getting low
door step os corroded non precribed area
front panel insecure
nsr inner wheel arch corroded no prescribed area
os mirror cracked but view to rear clear
osr bumper slight movement
underbonnet surface rust underbody surface rust and bodywork surface rust
Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
Front passenger seat insecure (6.2.3)
Nearside Front wheel bearing rough when rotated (2.5.A.2)
Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)
Nearside Registration plate lamp not illuminating the registration plate (1.1.C.1e)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Registration plate lamp not working (1.1.5c)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Parking brake lever has no reserve travel (3.1.6b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear fog lamp not working (1.3.2b)
Offside rear brake recording little or no effort (3.7.B.5a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Registration plate lamp not working (1.1.5c)
Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear rear brake binding (3.7.B.1)
Service brake: efficiency below requirements (3.7.B.7)
Horn not loud enough to be heard by another road user (1.6.2b)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear fog lamp not working (1.3.2b)
Service brake: efficiency below requirements (3.7.B.7)
Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
How Reliable is the Mercedes-benz 310?
Based on 12,640 MOT tests across 1,412 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
H793 YDM is a 1990 Mercedes-benz 310 in Blue with a 2,874cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 47.6%.
Across all 1990 Mercedes-benz 310 models, the average MOT pass rate is 63.4% with a typical mileage of 113,985 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz 310 fails its MOT is parking brake: efficiency below requirements, accounting for 880 recorded failures. If you're considering buying H793 YDM, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz 310 typically stays on UK roads for around 42 years. At 36 years old, this Mercedes-benz 310 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of H793 YDM?
You can check the full history of H793 YDM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was H793 YDM registered?
H793 YDM is a 1990 Mercedes-benz 310, first registered on 10 December 1990.
Is H793 YDM safe to buy?
The MOT history for H793 YDM shows 21 tests with a 47.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does H793 YDM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on H793 YDM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.