1991 Mazda MX-5

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened Nearside and Offside (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened Nearside and Offside (5.3.3 (b) (i))

general surface rust on suspension and chassis

Driver's door cannot be opened from outside the vehicle (6.2.3 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor (5.3.6 (a) (i))

Oil leaking excessively from engine (8.4.1 (a) (i))

Power steering pipe/hose leaking (2.1.5 (a))

Seat belt anchorage prescribed area strength or continuity significantly reduced Offside Sill (7.1.1 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

General Surface Corrosion on Chassis and Suspension Components

Sub-frame corroded but not seriously weakened Front and Rear (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened Offside and Nearside Front (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened Offside and Nearside Rear (5.3.3 (b) (i))

General Corrosion On Chassis

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Panel Behind Wheel (5.3.6 (a) (i))

Sub-frame corroded but not seriously weakened Front and Rear (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened Offside and Nearside Front (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened Offside and Nearside Rear (5.3.3 (b) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Panel Behind Wheel (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor (5.3.6 (a) (i))

Offside Front Service brake lagging in operation (1.2.1 (d))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

General Corrosion On Chassis

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Panel Behind Wheel (5.3.6 (a) (i))

Sub-frame corroded but not seriously weakened Front and Rear (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened Offside and Nearside Front (5.3.3 (b) (i))

Suspension arm corroded but not seriously weakened Offside and Nearside Rear (5.3.3 (b) (i))

Central Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Inner Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

nearside and offside front wings lower part corroded

slight corrosion on panel behind nearside front wheel

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brakes imbalanced across an axle (3.7.B.5b)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Driver's door cannot be opened from inside the vehicle (6.2.B.1b)

Driver's door cannot be opened from outside the vehicle (6.2.B.1b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is severely distorted (5.2.6)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brake pipe excessively corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brake pipe slightly corroded (3.6.B.2c)

nearside rear brake disc corroded

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

front brake balance on limit

Offside Front coil spring worn so that its cross sectional area is reduced and seriously weakened (2.4.C.1b)

Offside Rear Brake lever has restricted free movement (3.5.1k)

Offside Rear rear brake binding (3.7.B.1)

Offside Rear rear brake juddering severely (3.7.A.5b)

Parking brake: efficiency below requirements (3.7.B.7)

offside rear tyre close to lmt