MOT Status
ExpiredMileage
135,736 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Anti-roll bar linkage fractured (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear fog lamp not working (1.3.2b)
Rear registration plate delaminated (6.3.1d)
Nail in offside front tyre
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
offside front inner wheel arch roted but not in perscribed area
rear number plate in poor condition
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)
Offside Front Front constant velocity joint gaiter split (2.5.C.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
rear number plate in poor condition
Nearside Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.5c)
Offside Brake pipe excessively corroded (3.6.B.2c)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Tyre tread depth below requirements of 1.0mm (4.1.E.2b)
Offside Front Tyre tread depth below requirements of 1.0mm (4.1.E.2b)
Offside Rear Tyre tread depth below requirements of 1.0mm (4.1.E.2b)
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
H806 FJO is a 1990 Mazda 323 in Red with a 1,498cc petrol engine. This vehicle has been through 8 MOT tests with a personal pass rate of 50%.
Across all 1990 Mazda 323 models, the average MOT pass rate is 62.1% with a typical mileage of 94,435 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying H806 FJO, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 36 years old, this Mazda 323 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of H806 FJO?
You can check the full history of H806 FJO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was H806 FJO registered?
H806 FJO is a 1990 Mazda 323, first registered on 20 September 1990.
Is H806 FJO safe to buy?
The MOT history for H806 FJO shows 8 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does H806 FJO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on H806 FJO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.