1991 Yamaha DT125

Brake pedal insecure (3.1.2a)

Drive chain worn to excess (6.2.1e)

Front Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Horn not working (1.7.3a)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride Split link (6.2.1h)

Offside Rear Direction indicators not working (1.5.1c)

Rear Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Rear Fairings insecure and likely to impede the steering (2.1.2e)

Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Secondly locking device missing on rear spindle (6.2.1h)

Rear reflector on motorcycle missing (1.4.1)

Registration plate incorrect (6.3.1a)

Stop lamp does not illuminate immediately a brake applies On foot brake (1.3.1a)

Chain guard missing ()

Clutch lever bent (6.2.1g)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Mirrors missing

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear suspension bush has slight free play (2.4.A2a(i))

Steering headbearing has slight free play (2.2.2)

Centre Rear reflector on motorcycle missing (1.4.1)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Horn not loud enough to be heard by another road user (1.7.3a)

All position lamps do not illuminate immediately when switched on (1.1.3a)

Direction indicators not working (1.5.1c)

Exhaust is leaking and excessively noisey (7.1.1b)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Brake disc(s) excessively worn (3.2.A1l)

Front Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Front Direction indicator insecure (1.5.3b)

Front Drive chain sprocket worn to excess (6.2.1e)

Front Wheel spoke excessively loose (4.2.1b)

Front suspension assembly component loose (2.3.1)

Handlebar mounting clamp bolt loose (2.1.1a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Horn not working (1.7.3a)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Wheel spoke excessively bent (4.2.1b)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Throttle operating incorrectly (6.2.1f)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Brake component has an inadequate repair (3.1.5) DANGEROUS

Front suspension assembly component loose (2.3.1) DANGEROUS

Rear Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c) DANGEROUS

Rear suspension component loose (2.4.A.1a) DANGEROUS

Front brake lever incorrect? Doesn't meet master cylinder plunger immediately

Oil leak

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Chain guard missing

Unable to stop engine running. All electrics disconnected