1990 Mazda MX-5

heavily welded and undersealed

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength off side rear top spring mounts (5.3.6 (a) (i))

heavily welded and undersealed

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

fuel pipes rusted

fuel tank rusted

previous welding repairs carried out

Battery insecure (1.9.1)

fuel pipes rusted

fuel tank rusted

previous welding repairs carried out

Nearside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear coil spring corroded (2.4.C.1b)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Headlamp aim too low (1.8)

Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Side repeater not working (1.4.A.2c)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Inner Rear Brake pipe excessively corroded (3.6.B.2c)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Nearside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear coil spring corroded (2.4.C.1b)

brake pipes greased

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

brake pipe to rear hoses has surface corrosion

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

brake pipe to rear hoses has surface corrosion

n/s front inner wheel arch corroded but not within 30cm of a mounting point

Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Rear Brake pipe slightly corroded (3.6.B.2c)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust has a part missing (7.1.1a)

Offside Rear Braking system leaking (3.6.A.1)