1990 Toyota MR2

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced door sill (6.1.1 (c) (i))

Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced door sill (6.1.1 (c) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced door sill (6.1.1 (c) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

both front tyres perished

oil leak

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

both front tyres perished

oil leak

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

oil leak

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Parking brake lever has no reserve travel (3.1.6b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

Rear Vehicle structure has slight corrosion (6.1.A.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Battery insecure (1.9.1)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Steering rack gaiter split (2.2.D.2d)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Headlamp aim too low (1.8)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake: efficiency below requirements (3.7.B.7)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

Rear Vehicle structure has slight corrosion (6.1.A.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

o/s/f tyre worn on inner edge

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Brake pad(s) wearing thin (3.5.1g)