MOT Status
ExpiredMileage
84,354 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake master cylinder/servo mounting prescribed area is excessively corroded (1.1.21 (e) (i))
Headlamp aim too high BOTH (4.1.2 (a))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i))
Offside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
THICK UNDER-SEAL ON UNDERSIDE OF THE VEHICLE
underside of vehicle corroded
Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
corrosion starting on floor
cut nearside front tyre
both outer sill panels close to seat belt mountings are rusted and weak
exhaust is corroded and blowing
various areas of welding
various body panels are rusted and weak
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
corrosion rear of offside front arch
offside sill corroded
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Brake pad(s) wearing thin (3.5.1g)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
rear brake discs rusty
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
front brake application uneven (3.7.B.2)
rear brake discs rusty
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) DANGEROUS
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front brake disc excessively pitted (3.5.1h)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear brake disc contaminated by grease (3.5.1h)
Offside Front brake disc excessively pitted (3.5.1h)
Offside Rear brake disc contaminated by grease (3.5.1h)
How Reliable is the Mazda MX-5?
Based on 2,502,760 MOT tests across 160,823 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
H931 GKB is a 1990 Mazda MX-5 in Red with a 1,597cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 63.2%.
Across all 1990 Mazda MX-5 models, the average MOT pass rate is 68.2% with a typical mileage of 116,196 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MX-5 fails its MOT is seat belt anchorage prescribed area is excessively corroded, accounting for 44,475 recorded failures. If you're considering buying H931 GKB, it's worth having these areas checked by a mechanic before committing.
The Mazda MX-5 typically stays on UK roads for around 36 years. At 36 years old, this Mazda MX-5 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of H931 GKB?
You can check the full history of H931 GKB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was H931 GKB registered?
H931 GKB is a 1990 Mazda MX-5, first registered on 25 September 1990.
Is H931 GKB safe to buy?
The MOT history for H931 GKB shows 19 tests with a 63.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does H931 GKB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on H931 GKB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.