2004 Toyota MR2

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

both door mirrors loose on hinges

corner missing from front number plate

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Lower Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)

Nearside Front Front suspension has slight play in an outer ball joint (2.5.B.2a)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

both door mirror pivots loose

front numberplate damaged

offside front wheel slightly sticking on

Oil leak

both front inner brake pads look low

nearside front tyre close to limit on inner and outer edges

offside front tyre getting low

offside rear brake pads look low

vehicle has different ratio of tyre sizes on front and rear

Brake pedal spongy (3.3.B.1b)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Nearside Rear Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Nearside Rear Braking system leaking (3.6.A.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Parking brake lever has no reserve travel (3.1.6b)

Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

offside front tyre getting low

offside rear brake pads look low

Oil leak

both front inner brake pads look low

nearside front tyre close to limit on inner and outer edges

rear shock absorbers have slight leak of oil

exhaust has slight blow

nearside front tyre close to limit

nearside rear shock absorber slight leak of oil

nearside rear tyre on wear limit

offside front tyre scrubbing on inner edge

offside rear tyre close to limit

Front brake disc slightly pitted (3.5.1h)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Rear brake disc slightly pitted (3.5.1h)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear wheel bearing has excessive play (2.6.2)

Offside Rear wheel bearing has excessive play (2.6.2)

Parking brake: efficiency below requirements (3.7.B.7)