MOT Status
ExpiredMileage
134,473 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear Outer sill slightly corroded
Oil leak, but not excessive (8.4.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Headlamp reflector slightly defective (4.1.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Jacking point (5.3.6 (a) (i))
Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Outer Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Outer Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
front to rear brake pipe slightly rusty
offside front seat belt buckle button missing
rear bump stops broken
Exhaust has a major leak of exhaust gases front pipe (7.1.2)
Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Brake cable insecure (3.5.1d)
Nearside rear brake recording little or no effort (3.7.B.5a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Suspension component mounting prescribed area is excessively corroded floor pan (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Nearside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Outer Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Outer Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
front to rear brake pipe slightly rusty
offside front seat belt buckle button missing
rear bump stops broken
Nearside Front Upper slight oil leak from engine
Nearside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Headlamp damaged but light output not reduced (1.7.5a)
Oil leak
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Oil leak
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
o/s head lamp has slight damage
Nearside Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Brake pipe excessively corroded (3.6.B.2c)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Oil leak
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
o/s head lamp has slight damage
Offside Brake cable has wires broken but is not significantly weakened (3.5.1b)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Headlamp not in a clean condition but not affecting beam image (1.2.4a)
Offside Outer Front constant velocity joint is slightly worn (2.5.C.1b)
nearside rear axle bump stop missing
Nearside Inner Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Inner Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
nearside rear bump stop missing
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Registration plate lamp not working (1.1.5c)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Inner Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Inner Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
nearside rear bump stop missing
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
brake wear indicators missing
o/s/f seatbelt surround broken but seatbelt operational
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Headlamp aim too high (1.8)
Nearside Headlamp not working on main beam (1.7.5a)
Offside Headlamp aim too high (1.8)
Offside Headlamp not working on main beam (1.7.5a)
Offside Registration plate lamp not working (1.1.5c)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
How Reliable is the Peugeot 205?
Based on 591,894 MOT tests across 102,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
H960 EFW is a 1990 Peugeot 205 in Silver with a 1,360cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 69.6%.
Across all 1990 Peugeot 205 models, the average MOT pass rate is 64.6% with a typical mileage of 101,760 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Peugeot 205 fails its MOT is brake pipe excessively corroded, accounting for 43,839 recorded failures. If you're considering buying H960 EFW, it's worth having these areas checked by a mechanic before committing.
The Peugeot 205 typically stays on UK roads for around 40 years. At 36 years old, this Peugeot 205 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of H960 EFW?
You can check the full history of H960 EFW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was H960 EFW registered?
H960 EFW is a 1990 Peugeot 205, first registered on 7 December 1990.
Is H960 EFW safe to buy?
The MOT history for H960 EFW shows 23 tests with a 69.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does H960 EFW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on H960 EFW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.