1991 Yamaha SR125

Rear Wheel bearing has slight play (5.1.3 (a) (i))

headlamp unit cracked

All direction indicators missing (4.4.1 (a) (ii))

Rear Footrest missing both (6.2.12 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

headlamp unit cracked

oil leak

Rear Wheel bearing has slight play on limit (5.1.3 (a) (i))

Registration plate deteriorated but not likely to be misread on very limit (0.1 (b))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Wheel bearing has slight play on limit (5.1.3 (a) (i))

Registration plate deteriorated but not likely to be misread on very limit (0.1 (b))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Wheel alignment slightly misaligned (2.4 (a))

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Headlamp aim too low (4.1.2 (a))

Rear reflector missing (4.8.2 (a) (ii))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Wheel alignment slightly misaligned (2.4 (a))

Drive chain slightly loose on very limit (6.1.7 (c) (i))

Wheel alignment slightly misaligned on very limit (2.4 (a))

Wheel alignment slightly misaligned on very limit (2.4 (a))

both foot peg rubbers split

Rear Wheel alignment slightly misaligned (2.4 (a))

Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Front Brake component has restricted free movement and operation is likely to be impeded brake (3.2.A1h)

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Wheel alignment incorrect which adversely affects the handling wheel (2.5.1)

Clutch lever shortened. (6.2.1g)

Drive chain slightly loose (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Floor brake test indicates a sticking brake (3.3.C2c)

Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Clutch lever shortened. (6.2.1g)

Drive chain slightly loose (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Exhaust slightly deteriorated (7.1.1a)

Motorcycle structure slightly corroded (6.1.1a)

rear brake very noise( worn)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Exhaust slightly deteriorated (7.1.1a)

Motorcycle structure slightly corroded (6.1.1a)

rear brake very noise( worn)

Rear Drive chain worn but not considered excessive (6.2.1e)

Front Stop lamp remains on when the brake is released (1.3.1e)

Rear Plate brake test indicates a sticking brake (3.3.B1a)

Rear Registration plate deteriorated (6.3.1d)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Drive chain worn but not considered excessive (6.2.1e)

Front Tyre has a lump caused by separation or partial failure of its structure (4.1.2a(ii)) DANGEROUS

Direction indicator flashing less than 60 times a minute (1.5.1c)

Drive chain slightly loose (6.2.1d)

Headlamp aim too low (1.6)

Drive chain slightly loose (6.2.1d)

Rear Wheel spoke slightly corroded. (4.2.1b)

Drive chain excessively loose (6.2.1d)

Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Horn is not a constant note (1.7.3c)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Front wheel bearings have excessive free play (2.3.5b) DANGEROUS

Rear Wheel spoke slightly corroded. (4.2.1b)

Drive chain excessively loose (6.2.1d)

Exhaust is leaking and excessively noisey (7.1.1b)

Front All position lamps do not illuminate immediately when switched on (1.1.3a)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Front Tyre worn close to the legal limit (4.1.3(ii))