1991 Fiat Ducato

Horn not working (7.7 (a))

Rear fog lamp not working (4.5.1 (a) (ii))

Central Rear Brake hose bulging under pressure (1.1.12 (d))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake excessively binding (1.2.1 (f))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Headlamp light source and lamp not compatible (4.1.4 (c))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Headlamp light source and lamp not compatible (4.1.4 (c))

Offside Rear Service brake excessively binding (1.2.1 (f))

Rear fog lamp not working (4.5.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Brake pipe likely to become detached or damaged (1.1.11 (d) (ii))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Exhaust system insecure all mounting rubbers split after silencer (6.1.2 (a))

Horn not working (7.7 (a) (ii))

Nearside Front Suspension component mounting prescribed area is inadequately repaired inner wheel well by tiebar (5.3.6 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid wheel cylinder (1.1.16 (b) (i))

Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired Sill. (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired panel below 1/4 bumper. Sill filled with silicone and expanding foam. (5.3.6 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength panel below 1/4 bumper. Sill filled with silicone and expanding foam. (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired sill end closing panel missing (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired sill filled with silicone and expanding foam (5.3.6 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear Brakes imbalanced across an axle 58% imbalance (1.2.1 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Vehicle structure excessively corroded within 30cm of towbar mounting rear panel above towbar (6.1.6 (i) (i))

Brake pipe leaking on a hydraulic braking system pipe on rear axle (1.1.11 (b) (ii)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material by pipe clip on chassis (1.1.11 (c))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel well by tiebar (5.3.6 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SPRING MTG OUTTER SILL (5.3.6 (a) (i))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced OUTRIGGER (6.1.1 (c) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

exhaust mountings cracked

exhaust mountings cracked

exhaust mountings cracked

Offside Side repeater not working (1.4.A.2c)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Exhaust has part of the system excessively deteriorated (7.1.1a)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

VERY SLIGHT BIND OFFSIDE REAR BRAKE

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

VERY SLIGHT BIND OFFSIDE REAR BRAKE