1991 Kawasaki KMX200

Registration plate deteriorated but not likely to be misread Slightly delaminated (0.1 (b))

Horn not working (7.7 (a))

Wheel alignment incorrect which adversely affects the steering (2.4 (a))

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Wheel alignment slightly misaligned (2.4 (a))

Drive chain slightly loose (6.2.1d)

Front Wheel spoke slightly corroded. (4.2.1b)

Rear mono-shock pivot worn but not excessive (2.4.B.4)

rear brake disc rusted

Drive chain slightly loose (6.2.1d)

Front Wheel spoke slightly corroded. (4.2.1b)

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Stop lamp remains on when the brake is released (1.3.1e)

rear brake disc rusted

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Direction indicators affected by the operation of another lamp (1.5.1c)

Horn is not continous or uniform (1.7.3c)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Rear suspension bearing has slight free play (2.4.A2a(i))

Rear Brake pedal pivots slightly worn (3.1.3a)

Rear suspension bush has slight free play (2.4.A2a(i))

Drive chain excessively loose (6.2.1d)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Brake pedal pivots slightly worn (3.1.3a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear suspension bush has slight free play (2.4.A2a(i))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain slightly loose (6.2.1d)

Front shock absorber has light misting of stanchion (2.3.3)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Wheel spoke slightly corroded. (4.2.1b)

Rear Wheel spoke slightly corroded. (4.2.1b)

Rear reflector on motorcycle missing (1.4.1)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

Front Wheel spoke slightly corroded. (4.2.1b)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear Wheel spoke slightly corroded. (4.2.1b)

Front Brake lever is short but brake can still be readily applied (3.1.3c)