1982 Mercedes-benz 380

Front Oil leak, but not excessive (8.4.1 (a) (i))

Rear Oil leak, but not excessive (8.4.1 (a) (i))

Fluid leak, but not excessive (8.4.1 (a) (i))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Hydraulic leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Headlamp aim not tested (4.1.2 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Driver's seat insecure (6.2.5 (a) (ii)) DANGEROUS

Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) DANGEROUS

Fluid leak, but not excessive (8.4.1 (a) (i))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Hydraulic leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Door Sill (5.3.6 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis Rail (5.3.6 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Door Sill (5.3.6 (a) (i))

Windscreen washer not working (3.5 (a))

Items removed from driver's view prior to test ()

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive Wheel Arch (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive Wheel Arch (5.3.6 (a) (i))

Offside Front Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Power steering pipe/hose leaking (2.1.5 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak

Rear Brake pipe corroded, covered in grease or other material Both side (1.1.11 (c))

Steering box leaking oil (2.1.1 (e) (i))

Front Brake pipe slightly corroded Both side (3.6.B.2c)

Oil leak

Rear Body has slight corrosion Both side (6.1.B.2)

Rear Brake pipe slightly corroded Both side (3.6.B.2c)

Power steering pipe(s) or hose(s) leaking from a seal (2.3.3b)

Front Brake pipe slightly corroded Both side (3.6.B.2c)

Oil leak

Rear Body has slight corrosion Both side (6.1.B.2)

Rear Brake pipe slightly corroded Both side (3.6.B.2c)

Horn not working (1.6.2a)

Nearside Front Wheel nut(s) missing (4.2.A.1e)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Wheel nut(s) missing (4.2.A.1e)

Offside Front Wheel nut(s) missing (4.2.A.1e)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Wheel nut(s) missing (4.2.A.1e)

Windscreen washer provides insufficient washer liquid (8.2.3)