2004 Ford Transit

Horn not working (7.7 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner valance/floor (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced side door step (7.1.1 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced step (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner valance/floor (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

corrosion outside prescribed areas

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

corrosion outside prescribed areas

Nearside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner valance (5.3.6 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Brake pipe corroded, covered in grease or other material both frontr to rear (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner valance (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Brake pipe corroded, covered in grease or other material both frontr to rear (1.1.11 (c))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Rear Braking system leaking (1.1.3 (d))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive Top of chassis rail by engine mounting , under bulkhead (2.4.A.3)

Nearside Front Seat belt anchorage prescribed area is excessively corroded Inner sill / passenger step , marked (5.2.6)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside rear parking brake recording little or no effort 280kg (3.7.B.6a)

Offside rear parking brake recording little or no effort 170kg (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive Top of chassis rail by engine mounting , under bulkhead (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive Directly below brake servo , unable to mark due to location (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner chassis rail directly above axle , area marked . (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded Under drivers step , area marked (5.2.6)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive Directly below brake servo , unable to mark due to location (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner chassis rail directly above axle , area marked . (2.4.A.3)

Offside Track rod end ball joint has slight play (2.2.B.1f)

Nearside Rear Suspension component mounting prescribed area is excessively corroded Crossmember (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch / floor (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded Out rigger (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded Crossmember (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch / floor (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded Out rigger (2.4.A.3)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Rear Brakes imbalanced across an axle 60% (3.7.B.5b)

Oil leak

engine oil level on minimum

nearside rear inner wheel arch corroded but not within prescribed area

slight play offside steering rack

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Registration plate lamp not working (1.1.C.1d)

Oil leak

engine oil level on minimum

nearside rear inner wheel arch corroded but not within prescribed area

slight play offside steering rack

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Centre Front Seat belt affected by an insecure seat fixing (5.2.1b)

Front registration plate deteriorated (6.3.1d)

Nearside Front Front wheel bearing rough when rotated (2.5.A.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear brake drum contaminated by oil (3.5.1h)

Nearside rear brake binding (3.7.B.1)

Offside rear brake binding (3.7.B.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

front reg plate poor condition

oil leak

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Registration plate lamp not working (1.1.C.1d)

rear brake application uneven (3.7.B.2)

rear brakes release unevenly (3.7.B.4)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

front reg plate poor condition

oil leak

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

rear brake application uneven (3.7.B.2)

front numberplate poor condition

screw in offside front tyre

Offside rear brake binding (3.7.B.1)

rear brake application uneven (3.7.B.2)

rear brakes release unevenly (3.7.B.4)

front numberplate poor condition

screw in offside front tyre

Headlamp aim too low (1.8)

Registration plate lamp not working (1.1.5c)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen wiper not operating automatically when switched on (8.2.1b)