2007 Mini One

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Tyre worn close to legal limit/worn on edge STRONG ADVISE X2 CLOSE TO LIMIT (5.2.3 (e))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Tyre worn close to legal limit/worn on edge STRONG ADVISE X2 CLOSE TO LIMIT (5.2.3 (e))

Exhaust has a minor leak of exhaust gases flexi pipe (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Upper Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Nearside Rear Upper Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

covers fitted

front and rear suspension corroded

Exhaust has a minor leak of exhaust gases flexi pipe (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Upper Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Nearside Rear Upper Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Offside Front Headlamp insecure (4.1.1 (c))

covers fitted

front and rear suspension corroded

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

under body corrosion

Oil leak, but not excessive (8.4.1 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Central exhaust heat shield inscure

Front Exhaust has a minor leak of exhaust gases flexi (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Central exhaust heat shield inscure

Front Exhaust has a minor leak of exhaust gases flexi (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Exhaust leaking behind flexi pipe but still secure.

N/S & O/S Under guards fitted not allowing a full inspection of components.

N/S & O/S outer plastic sill guards fitted not allowing a full inspection.

Offside Drive shaft support bearing feels rough when rotated.

Rear Brake pipe corroded, covered in grease or other material N/S & O/S (1.1.11 (c))

Rear Service brake binding but not excessively N/S & O/S (1.2.1 (f))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Rear Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Exhaust leaking behind flexi pipe but still secure.

N/S & O/S Under guards fitted not allowing a full inspection of components.

N/S & O/S outer plastic sill guards fitted not allowing a full inspection.

Rear Brake pipe corroded, covered in grease or other material N/S & O/S (1.1.11 (c))

Rear Service brake binding but not excessively N/S & O/S (1.2.1 (f))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Windscreen wiper does not clear the windscreen effectively x2 (3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Pad Wear sensor insecure

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Brake fluid warning lamp illuminated (1.1.10 (f))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Pad wear sensor insecure