MOT Status
ExpiredMileage
206,504 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Engine Noisey
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Subframe Corroded
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Under Body Corroded
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Side repeater incorrect colour (4.4.3 (a))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Engine Noisey
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Subframe Corroded
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Direction indicator slightly discoloured (4.4.3 (a))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Direction indicator slightly discoloured (4.4.3 (a))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Under Body Corroded
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Power steering pipe/hose slightly corroded Pipe to pump (2.1.5 (g) (i))
Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Brake pipe excessively corroded Both front to rear (1.1.11 (c))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Windscreen wiper blade defective (3.4 (b) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Power steering pipe/hose slightly corroded Pipe to pump (2.1.5 (g) (i))
Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Exhaust system insecure front exhaust bracket broken (6.1.2 (a))
Nearside Front Anti-roll bar pin or bush excessively worn inner 'd' bush (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush excessively worn inner 'd' bush (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Central Upper Stop lamp(s) non-obligatory stop lamp not working high level (4.3.1 (a) (ii))
Nearside Headlamp aim too high (4.1.2 (a))
Offside Headlamp aim too high (4.1.2 (a))
o/s & n/s/f metal brake pipes to flexi hoses surface corrosion
slight imbalance apparent front and rear brakes
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
rear reg plate i poor condition
rear number plate in poor condition
slight play in front suspension
nearside front inner suspension bush de bonding
rear number plate in poor condition
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
How Reliable is the Kia Rio?
Based on 1,637,344 MOT tests across 141,212 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HD08 BCZ is a 2008 Kia Rio in Blue with a 1,493cc diesel engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 2008 Kia Rio models, the average MOT pass rate is 71.9% with a typical mileage of 60,428 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Kia Rio fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 34,517 recorded failures. If you're considering buying HD08 BCZ, it's worth having these areas checked by a mechanic before committing.
The Kia Rio typically stays on UK roads for around 25 years. At 18 years old, this Kia Rio is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of HD08 BCZ?
You can check the full history of HD08 BCZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HD08 BCZ registered?
HD08 BCZ is a 2008 Kia Rio, first registered on 7 July 2008.
Is HD08 BCZ safe to buy?
The MOT history for HD08 BCZ shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HD08 BCZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HD08 BCZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.