2002 Suzuki Swift

Vehicle structure is corroded but structural rigidity is not significantly reduced both side rear (6.1.1 (c) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii))

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii))

Centre Brake pipe slightly corroded (3.6.B.2c)

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

rear fuel pipe corroded

Front registration plate deteriorated (6.3.1d)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Centre Brake pipe slightly corroded (3.6.B.2c)

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

rear fuel pipe corroded

Headlamp aim too low (1.8)

Nearside Front position lamp(s) not working (1.1.A.3b)

Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front coil spring corroded (2.4.C.1b)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Stop lamp not working (1.2.1b)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front coil spring corroded (2.4.C.1b)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front coil spring corroded (2.4.C.1b)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Steering component mounting prescribed area is corroded but not considered excessive (2.2.C.1h)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front coil spring corroded (2.4.C.1b)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

both front tyres getting low

both front tyres perished

rust on front and rear chassis

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Stop lamp not working (1.2.1b)

Offside Stop lamp not working (1.2.1b)

Offside front brake application uneven (3.7.B.2)

rust on front and rear chassis

Both front tyre sidewalls becoming perished.

N/S wiper blade deteriorated.

O/S brake disc discoloured, brakes slightly unbalanced.

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

rear service brakes just meet minimum requirement

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Rear rear brake application uneven (3.7.B.2)