2003 Ford Transit

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bushes (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheelarch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheelarch (5.3.6 (a) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bushes (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind rear spring (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above rear spring (5.3.6 (a) (i))

Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill *3 (6.1.1 (c) (i))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind rear spring *2 (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting (5.3.6 (a) (i))

Rear Prop shaft bearing excessively worn (6.1.7 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected in front of rear spring (5.3.6 (a) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Central Brake pipe corroded, covered in grease or other material n/s and o/s (1.1.11 (c))

Centre prop[ shaft bush worn

Front Brake disc worn, pitted or scored, but not seriously weakened n/s and o/s (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Underbody general corrosion

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch area (6.2.2 (d) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear of leaf spring area (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch area (6.2.2 (d) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear of leaf spring area (5.3.6 (a) (i))

Rear Exhaust system insecure Bracket broken (6.1.2 (a))

Central Brake pipe corroded, covered in grease or other material n/s and o/s (1.1.11 (c))

Centre prop[ shaft bush worn

Front Brake disc worn, pitted or scored, but not seriously weakened n/s and o/s (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Underbody general corrosion

Front Brake disc worn, but not excessively both front (1.1.14 (a) (i))

Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced inner sill/step (6.1.1 (c) (i))

Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Nearside Front Brake pipe excessively corroded around chassis (1.1.11 (c))

Nearside Rear Brake pipe excessively corroded across axle (1.1.11 (c))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Front Brake disc worn, but not excessively both front (1.1.14 (a) (i))

Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced inner sill/step (6.1.1 (c) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material across axle (1.1.11 (c))

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive leaf spring mounting (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive leaf spring mounting (2.4.A.3)

Nearside Front Tyre worn close to the legal limit slight wear (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive leaf spring mounting area (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit 1.8mm (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive leaf spring mounting area (2.4.A.3)

Offside Rear Tyre worn close to the legal limit 1.8mm (4.1.E.1)

Nearside Rear Body has a sharp edge caused by corrosion outer lower panel (6.1.C.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded rear leaf spring mounting area (2.4.A.3)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre outer sill (6.1.B.2)

Nearside Front Tyre worn close to the legal limit slight wear (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive leaf spring mounting area (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit 1.8mm (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive leaf spring mounting area (2.4.A.3)

Offside Rear Tyre worn close to the legal limit 1.8mm (4.1.E.1)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Brake pipe slightly corroded chassis area (3.6.B.2c)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Nearside Front Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Offside Front Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3)

Offside Rear Braking system leaking wheel cylinder (3.6.A.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Brake pipe slightly corroded chassis area (3.6.B.2c)

Nearside Front Front position lamp(s) not working side light (1.1.A.3b)

Nearside Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

nearside rear chassis leg slight corrosion

offside rear chassis leg slight corrosion

Nail in nearside rear tyre

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Leaf spring anchor bracket loose (2.4.B.6a)

Nail in nearside rear tyre

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

slight bind to nearside rear brake

slight bind to nearside rear brake

Nearside Rear Rear wheel bearing rough when rotated (2.6.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Rear wheel bearing rough when rotated (2.6.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Registration plate lamp not working (1.1.5c)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Offside Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)