2005 Mazda MX-5

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect headlamp lens matted (4.1.2 (c))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner/outer sill (marked with chalk) (6.1.1 (c) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect headlamp lens matted (4.1.2 (c))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/jacking point (marked with chalk) (6.1.1 (c) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked with chalk (5.3.6 (a) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner/outer sill (marked with chalk) (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced lower corner (marked with chalk) (6.1.1 (c) (i))

Windscreen washer not working (3.5 (a))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Brake hose has slight corrosion to ferrule all four (1.1.12 (f) (i))

Brake pedal wearing smooth (1.1.2 (c))

Brake pipe corroded, covered in grease or other material all covered in underseal (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Body not fully secure wheel arch corroded (6.2.2 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Body not fully secure wheel arch corroded (6.2.2 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

all front suspension components corroded

all rear suspension components corroded

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Rear Brake modification adversely affecting braking performance discs incorrect size (1.1.21 (d) (ii)) DANGEROUS

Nearside Rear outer and inner sills corroded

Offside Rear inner and outer sills corroded

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Brake performance not tested (3.7.A.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid Brake calliper (3.6.A.1) DANGEROUS

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Inner Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Braking system leaking (3.6.A.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Inner Front brake disc slightly pitted (3.5.1h)

Offside Inner Front brake disc slightly pitted (3.5.1h)