2003 Toyota MR2

Front Brake hose has slight corrosion to ferrule o\s and n\s (1.1.12 (f) (i))

Front Shock absorbers has light misting of oil o\s and n\s (5.3.2 (b))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake hose has slight corrosion to ferrule o\s and n\s (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material o\s and n\s (1.1.11 (c))

Steering column flexible coupling is slightly deteriorated heavily corroded (2.2.2 (c))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Drive shaft bearing housing insecure (6.1.7 (f) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Steering wheel has movement relative to the column such that there is a serious risk of detachment (2.2.1 (a) (ii)) DANGEROUS

Front Brake hose has slight corrosion to ferrule o\s and n\s (1.1.12 (f) (i))

Front Shock absorbers has light misting of oil o\s and n\s (5.3.2 (b))

Offside Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake hose has slight corrosion to ferrule o\s and n\s (1.1.12 (f) (i))

Steering column universal joint has slight wear or play heavily corroded (2.2.2 (c))

horn button insecure

Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Brake pad(s) wearing thin front and rear (1.1.13 (a) (ii))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Headlamp lens slightly defective slightly clouded (4.1.1 (b) (i))

some tarnishing of offside and nearside headlamp lenses

front brake discs corroded

hand brake travel high

front and rear under tray fitted

hand brake travel high

Nearside Front Windscreen wiper does not clear the windscreen effectively blade split (8.2.2)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Front Headlamp aim too high (1.8)

front and rear under tray fitted

hand brake travel high

underside of vehicle starting to corrode

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

underside of vehicle starting to corrode

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

floor to sills starting to corrode

Front coil spring corroded (2.4.C.1b)

Tyre worn close to the legal limit (4.1.E.1)

Both front tyres worn on inner edges

Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

Front brake disc slightly pitted (3.5.1h)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front brake disc slightly pitted (3.5.1h)

handbrake travel

Offside Front brake disc slightly scored (3.5.1h)