2005 Peugeot Vivacity

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Brake lagging in operation (1.2.1 (d))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Steering linkage locking device ineffective (2.1.3 (d))

Steering operation impeded by a fairing (2.1.4 (e))

Steering operation linkage fouling when handlebars turned from lock to lock (2.1.4 (a))

Rear Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Wheel alignment slightly misaligned (2.4 (a))

secondary instrument clock fitted

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Rear Tyre worn close to the legal limit (4.1.3(i))

Wheel alignment slightly misaligned. (2.5.1)

Steering lock stop missing lefthand (2.1.3) DANGEROUS

Wheel alignment slightly misaligned. (2.5.1)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Rear Tyre worn close to the legal limit (4.1.3(i))

Front Brake lever cannot be released smoothly (3.1.3d)

Front Brake lever cannot be released smoothly (3.1.3d)

Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Nearside Steering lock stop ineffective (2.1.3)

Offside Steering lock stop ineffective (2.1.3)

Digital Speedometer display inoperative.

Front suspension assembly slightly corroded. (2.3.1)

Front tyre perished but cords not exposed.

Front wheel dust cap seized on valve.

Rear Motorcycle structure slightly corroded (6.1.1a)

Rear brake requires adjustment.

Rear shock absorber has a light misting (2.4.A.1c)

Rear suspension component slightly corroded. (2.4.A.1a)

Odometer/ display inoperative.

Rear shock absorber has a light misting (2.4.A.1c)

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Horn is not a constant note (1.7.3c)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Odometer/ display inoperative.

Rear shock absorber has a light misting (2.4.A.1c)

front valve cap sized

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Horn is not a constant note (1.7.3c)

Rear Brake lever cannot be released smoothly (3.1.3d)

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

battery not showing charge

front valve cap sized

Front Tyre valve stem slightly damaged (4.1.2c)

Rear Brake lever pivots slightly worn (3.1.3a)

Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)