2006 Jinlun Jl

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Exhaust noisy (8.1.1 (a))

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Suspension arm pin, bush or joint worn but not resulting in excessive movement swing arm bush has slight play (5.3.4 (a) (i))

Front brake calliper mount covered in chemical metal,

Riders seat slightly loose (6.2.5 (a) (ii))

Offside Rear Exhaust slightly loose (6.1.2 (a))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Headlamp aim so that beam "kick up" is not visible on the screen Faulty bulb (4.1.2 (a))

Motorcycle structure joining/attachment plate or fastening insecure Rear brake torque arm split pin missing (6.1.1 (b) (i))

Exhaust slightly loose (6.1.2 (a))

Front mudguard damaged but still secure.

Front tyre perishing in sidewalls.

Fuel tank slightly loose Rubbers worn (6.1.3 (a) (i))

Rear tyre perishing.

Securing bolt missing from backrest.

Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Drive chain rusted/tight links.

Exhaust slightly loose (6.1.2 (a))

Front mudguard damaged but still secure.

Front tyre perishing in sidewalls.

Rear tyre perishing.

Securing bolt missing from backrest.

Fuel tank mounts worn .

Exhaust is leaking but is not excessively noisey (7.1.1b)

front tyre cracking on sidewalls

headlight beam deflector fitted

rear tyre cracking on sidewalls

Drive chain excessively loose (6.2.1d)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Headlamp aim too high (1.6)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Rear reflector on motorcycle obscured (1.4.2b)

Rear suspension bearing has excessive free play swing arm (2.4.A2a(i))

Throttle operating incorrectly sticks open (6.2.1f)

front tyre cracking on sidewalls

rear tyre cracking on sidewalls

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Steering headbearing has excessive free play (2.2.2)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Exhaust noisy (7.1.2)

Rear reflector on motorcycle missing (1.4.1)

Steering headbearing has excessive free play (2.2.2)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Exhaust noisy (7.1.2)

Steering headbearing has slight free play (2.2.2)

front brake binding slightly

front tyre under inflated

Centre Front Front suspension has a slightly reduced damping effect (2.3.6c)

Centre Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Centre Front Front suspension has a slightly reduced damping effect (2.3.6c)

Centre Front Lower Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Centre Front Upper Steering movement excessively stiff with the wheel raised (2.2.1b)

Centre Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Fairings insecure and likely to impede the steering (2.1.2e)

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)