2008 Tgb 303R

Front Brake binding but not excessively (1.2.1 (f))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Break hose union rusty

Rear Tyre worn close to the legal limit (5.2.3 (e))

Exhaust slightly deteriorated (7.1.1a)

Front Brake hose slightly deteriorated Rusty banjo fixing (3.2.B3b)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front suspension assembly slightly corroded. Near side fork stanchion (2.3.1)

Rear Tyre worn close to the legal limit Small cut in tread pattern (4.1.3(i))

Throttle control is damaged but can be readily applied

Exhaust slightly deteriorated (7.1.1a)

Front Brake hose slightly deteriorated (3.2.B3b)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear tyre has a small cut in tread pattern

Throttle control is damaged but can be readily applied

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Exhaust slightly deteriorated (7.1.1a)

Front Brake hose slightly deteriorated (3.2.B3b)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear tyre has a small cut in tread pattern

Throttle control is damaged but can be readily applied

Exhaust slightly deteriorated (7.1.1a)

front brake hose union and caliper slightly corroded

front tyre has slight perishing around bead.

Exhaust slightly deteriorated (7.1.1a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

front brake hose union and caliper slightly corroded

front tyre has slight perishing around bead.

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake lever cannot be applied smoothly (3.1.3d)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

front tyre shows perishing around beading

Front wheel bearings are excessively rough (2.3.5b)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

front tyre shows perishing around beading