2013 Superbyke Rmr

Drive chain slightly loose (6.1.7 (c) (i))

All direction indicators incorrect colour (4.4.3 (a))

Drive chain excessively loose (6.1.7 (c) (i))

Position lamp showing white light to the rear (4.2.3 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Drive chain slightly loose (6.1.7 (c) (i))

Rear Brake indicates a slightly grabbing brake (1.2.1 (c))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Roller brake test indicates slight fluctuation of brake effort both (3.3.A1d)

Brake disc(s) securing bolt(s) missing 2 bolts missing (3.2.A1g)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Footrest missing Both rear (6.2.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front shock absorber seal failed and leaking oil Both (2.3.3)

Rear Brake disc(s) excessively scored (3.2.A1l)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Registration plate delaminated (6.3.1.d)

Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)

Throttle has a significant change in engine speed whilst moving the steering from lock to lock Cable routed incorrectly (2.1.4)

Both rear side panels loose but not insecure

Drive chain worn but not considered excessive (6.2.1e)

Exhaust guard bolt missing

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear suspension bush has slight free play Lower shock (2.4.A2a(i))