2001 Peugeot Motor Caravan

Central Front Integral body structure is corroded but structural rigidity is not significantly reduced radiator support cross memeber (6.1.1 (c) (i))

Exhaust mounting defective front rubber mounts missing (6.1.2 (a))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement both front lower drop link bushes perished (5.3.4 (a) (i))

Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security corroded by front sub-frame mount bolting (6.2.2 (d) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill of side door step (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced front of chassis leg underside (6.1.1 (c) (i))

Offside Front Play in steering rack inner joint(s) ()

Offside Front Service brake fluctuating, but not excessively just met limits (1.2.1 (e))

exhaust back box generally poor condition

previous repair to sills heavily undersealed

Central Front Integral body structure is corroded but structural rigidity is not significantly reduced radiator support cross memeber (6.1.1 (c) (i))

Exhaust mounting defective front rubber mounts missing (6.1.2 (a))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement both front lower drop link bushes perished (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security corroded by front sub-frame mount bolting (6.2.2 (d) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill of side door step (6.1.1 (c) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced front of chassis leg underside (6.1.1 (c) (i))

Offside Front Play in steering rack inner joint(s) ()

Offside Front Service brake fluctuating, but not excessively just met limits (1.2.1 (e))

exhaust back box generally poor condition

previous repair to sills heavily undersealed

Front x member corroded

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Brake performance unable to be tested due to front wheel not turning (1.2.1 (g))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Inner Parking brake mechanism/associated mounting prescribed area is excessively corroded sill (1.1.21 (e) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Front Outer Parking brake mechanism/associated mounting prescribed area is excessively corroded sill (1.1.21 (e) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Headlamp aim too high (4.1.2 (a))

Central Front x member corroded

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive x member (5.3.6 (a) (i))

Offside Front Inner Seat belt anchorage prescribed area is corroded but not considered excessive sii (7.1.1 (a) (i))

Offside Front Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Horn not working (7.7 (a))

Front Suspension component mounting prescribed area is corroded but not considered excessive x member (5.3.6 (a) (i))

Offside Front Inner Seat belt anchorage prescribed area is corroded but not considered excessive sii (7.1.1 (a) (i))

Offside Front Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Front x member corroded

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Front x member corroded

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch x2 (5.3.6 (a) (i))

Nearside Position lamp adversely affected by the operation of another lamp (4.2.3 (c))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill x2 (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch sill end (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch sill end (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x2 (5.3.6 (a) (i))

front cross member holed not within 30cm

general surface rust mainly front floor, outer sills and rear cross member

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (rear) spring hanger (5.3.6 (a) (i))

Offside Front outer sill plus floor pan holed not within 30cm

front cross member holed not within 30cm

general surface rust mainly front floor, outer sills and rear cross member

FRONT X MEMBER HOLED AND RUSTY NOT WITHIN 30CM

Nearside Front Electrical wiring inadequately secured above gearbox (4.11 (a) (i))

Offside Front Fluid leak, but not excessive coolant (8.4.1 (a) (i))

Power steering pipe/hose slightly corroded (STRONG ADVISORY) (2.1.5 (g) (i))

both inner and outer sills slightly rusty

front subframe mounting area rusty not holed

handbrake readings on min 16%

Driver's view of the road through the swept area of the windscreen materially affected by an obstruction (3.1 (a) (ii))

Nearside Rear Electrical wiring insecure and connectors likely to become disconnected spring hanger area (4.11 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

FRONT X MEMBER HOLED AND RUSTY NOT WITHIN 30CM

Nearside Front Electrical wiring inadequately secured above gearbox (4.11 (a) (i))

Offside Front Fluid leak, but not excessive coolant (8.4.1 (a) (i))

Power steering pipe/hose slightly corroded (STRONG ADVISORY) (2.1.5 (g) (i))

both inner and outer sills slightly rusty

front subframe mounting area rusty not holed

handbrake readings on min 16%

front cross member holes not within 30cm

front discs rusty

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

front cross member holes not within 30cm

front discs rusty

Nearside Front lower balljoint looks different size to o/s/f

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear tyre has various cuts in tread

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive rear spring hanger (2.4.A.3)

all suspension areas rusty

front brake disc rusty

loose wiring running along n/s of vehicle

Electrical wiring insecure from battery (1.9.2a)

Electrical wiring insecure under bonnet from coolant bottle (1.9.2a)

Nearside Front Front suspension has a suspension lower ball joint securing nut loose bolt snapped 1 of 4 (2.5.B.1a)

Nearside Front Front suspension has a suspension lower ball joint securing nut not locked thread not through lock nut completely (2.5.B.1a)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords sidewall (4.1.D.1a)

Nearside Rear Electrical wiring insecure (1.9.2a)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring hanger (2.4.A.3)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 215/75/r16c (4.1.D.1a)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too high (1.8)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Service brake: efficiency below requirements (3.7.B.7)

Steering lock fails to engage (2.1.4b)

Nearside Front lower balljoint looks different size to o/s/f

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear tyre has various cuts in tread

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive rear spring hanger (2.4.A.3)

all suspension areas rusty

front brake disc rusty

loose wiring running along n/s of vehicle

Play in steering rack inner joint(s)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

emissions did not read

Front registration plate deteriorated (6.3.1d)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Play in steering rack inner joint(s)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

emissions did not read

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Parking brake lever has little reserve travel (3.1.6b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

exhaust box rusty

Horn not working (1.6.2a)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Parking brake lever has little reserve travel (3.1.6b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

exhaust box rusty

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

exhaust rusty

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

rear exhaust rusty

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Lower Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

all exhaust rubbers perished

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Lower Exhaust system not adequately supported (7.1.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Lower Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

all exhaust rubbers perished

Nearside Inner Ball joint has slight play (2.2.B.1f)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Suspension joint nearside lower dust cover split/missing

Centre Rear Seat belt stitching badly frayed (5.2.2b)

Horn not working (1.6.2a)

Offside Rear Passenger's seat insecure (6.2.A.1)

Offside Rear Seat belt stitching badly frayed (5.2.2b)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Inner Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Suspension joint nearside lower dust cover split/missing

Nearside front bottom ball joint dust cover split.

Nearside brake disc slightly worn (3.5.1g)

Offside Front brake disc slightly worn (3.5.1g)