2003 Peugeot Vivacity

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Front Tyre valve stem slightly damaged (4.1.2c)

Front shock absorber has light misting of stanchion (2.3.3)

evidence that rear tyre has been run flat

r/h rear indicator lense missing, front r/h indicator a bit loose.

rear light lense is taped over, but light visable from rear.

Exhaust mounting missing (7.1.1c)

Fuel cap sealing washer missing (7.2.2c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Motorcycle structure excessively damaged (6.1.1a)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Brake lever mounting insecure (3.1.2a)

Rear reflector on motorcycle missing (1.4.1)

Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)

Steering movement excessively stiff with the wheel raised (2.2.1b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Front Tyre valve stem slightly damaged (4.1.2c)

Front shock absorber has light misting of stanchion (2.3.3)

evidence that rear tyre has been run flat

r/h rear indicator lense missing, front r/h indicator a bit loose.

rear light lense is taped over, but light visable from rear.

Steering movement slightly rough. (2.2.1a)

Tyre worn close to the legal limit (4.1.3(ii))

r/h switch gear loose.

rear suspension soft.

Front Roller brake test indicates a binding brake (3.3.A1a)

Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Headlamp aim too low (1.6)

Headlamp main beam flickers when tapped lightly by hand (1.2.2c)

Nearside Direction indicator not working (1.5.1c)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Front shock absorber has light misting of stanchion (2.3.3)

Steering movement slightly rough. (2.2.1a)

Tyre worn close to the legal limit (4.1.3(ii))

front panel loose

r/h switch gear loose.

rear suspension soft.

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Front position lamp insecure (1.1.1c)

Front Front wheel bearings are excessively rough (2.3.5b)

Front Front wheel bearings have excessive free play (2.3.5b)

Nearside Front Direction indicator insecure (1.5.3b)

Offside Front Direction indicator insecure (1.5.3b)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Registration plate insecure (6.3.1b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Rear Tyre worn close to the legal limit (4.1.3(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

rear tyre is flat. †throttle housing can be moved on bars. †left turn signal switch a bit fiddly try cleaning contacts. †rear mud guard not clipped in correctly.