2006 Hartford HD-125L

Drive chain worn to excess (6.1.7 (c) (i))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Headlamp aim too low (4.1.2 (a))

Horn not working (7.7 (a))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Brake excessively binding (1.2.1 (f))

Rear Brake grabbing severely (1.2.1 (c))

Rear Brake lagging in operation (1.2.1 (d))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Rear Tyre has ply or cord exposed (5.2.3 (d) (ii)) DANGEROUS

Front tyre perishing

Rear shock absorbers very stiff

Dash clocks loose

Front Shock absorber has slight external damage to the casing (5.3.2 (b))

Front tyre perishing

Fuel cap seal in poor condition, but sealing ok

Indicator tell tale inoperative (4.9.1 (a) (i))

Nearside Direction indicator flashing more than 120 times a minute (4.4.4 (a))

Offside Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear tyre perishing

Front Position lamp not working (4.2.1 (a))

Rear Position lamp likely to become detached (4.2.1 (c) (ii))

Rear Suspension arm attachment bracket/mounting insecure (5.3.3 (a) (i))

Dash clocks loose

Drive chain slightly loose (6.1.7 (c) (i))

Front Shock absorber has slight external damage to the casing (5.3.2 (b))

Front tyre perishing

Fuel cap seal in poor condition, but sealing ok

Indicator tell tale inoperative (4.9.1 (a) (i))

Nearside Direction indicator flashing more than 120 times a minute (4.4.4 (a))

Offside Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Centre stand pivot worn.

Front brake lever bent, not affecting operation.

Front tyre starting to perish

Rear tyre perished, no cords showing

Headlamp aim too low (4.1.2 (a))

Stop lamp not working (4.3.1 (a) (ii))

Centre stand pivot worn.

Front brake lever bent, not affecting operation.

Front tyre starting to perish

Offside Direction indicator flashing more than 120 times a minute front and rear (4.4.4 (a))

Offside Footrest slightly loose (6.2.12 (a))

Rear tyre perished, no cords showing

Wheel alignment slightly misaligned (2.4 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust system insecure (6.1.2 (a))

Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Suspension component mounting has an unsafe modification nut missing (5.3.3 (c) (i))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

advise clutch lever pivot worn cable route altered

gear lever slightly loose

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

advise front brake operation poor

rear brake noisey advise service

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

advise front brake operation poor

rear brake noisey advise service

Drive chain so loose it is likely to fail (6.1.7 (c) (ii))

Front Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (ii))

Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced (6.1.1 (b) (ii))

Drive chain worn but not considered excessive (6.2.1e)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front suspension assembly slightly corroded. (2.3.1)

Wheel alignment slightly misaligned. (2.5.1)

advise front tire very slightly perished

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Brake lever cannot be applied smoothly (3.1.3d)

Brake lever has inadequate reserve travel (3.1.3b)

Drive chain sprocket carrier worn to excess (6.2.1e)

Drive chain worn to excess (6.2.1e)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Horn not working (1.7.3a)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Rear suspension component loose (2.4.A.1a)

Stop lamp remains on when the brake is released (1.3.1e)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

advise gear lever loose

Horn is not a constant note (1.7.3c)

Horn not loud enough to be heard by another road user (1.7.3a)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Front suspension assembly slightly corroded. (2.3.1)

Headlamp damaged and function impaired (1.2.3a)

Offside Rear Motorcycle structure excessively damaged (6.1.1a)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear suspension bearing has excessive free play (2.4.A2a(i))

Brake lever is bent but brake can still be readily applied (3.1.3c)

Front suspension assembly slightly corroded. (2.3.1)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front suspension assembly slightly corroded. (2.3.1)

Rear Drive chain worn but not considered excessive (6.2.1e)

Rear Wheel alignment incorrect which adversely affects the handling (2.5.1)

Steering movement slightly stiff (2.2.1a)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front suspension assembly slightly corroded. (2.3.1)

Rear Drive chain worn but not considered excessive (6.2.1e)

Steering movement slightly stiff (2.2.1a)