2009 Triumph Speed Triple 1050

advise clutch pivot worn

Rear Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Headlamp aim too high (4.1.2 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Nearside Oil leak cam cover

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Lower drop link bearing (5.3.4 (a) (i))

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear suspension bearing has slight free play Upper drop link bearing (2.4.A2a(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Registration plate with character(s) which are not the correct height (6.3.4a)

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Headlamp aim too low (1.6)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear suspension bearing has slight free play Upper drop link bearing (2.4.A2a(i))

Clutch lever shortened. (6.2.1g)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))