2002 Aprilia RS 50

Drive chain slightly loose (6.2.1d)

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pedal cannot be released smoothly (3.1.3d)

Rear Brake pedal has inadequate reserve travel (3.1.3b)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort (3.3.A1c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(i))

Drive chain excessively loose (6.2.1d)

Exhaust is leaking and excessively noisey (7.1.1b)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Footrest missing (6.2.1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front wheel bearings are excessively rough (2.3.5b)

Nearside Front Direction indicator not working (1.5.1c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Rear Tyre worn close to the legal limit (4.1.3(i))

Headlamp aim too high (1.6)

Nail in rear tyre

Rear suspension bush has slight free play (2.4.A2a(i))

Front Brake lever pivots excessively worn (3.1.3a)

Fuel cap does not fasten securely by a positive means (7.2.2b)

Headlamp aim too high (1.6)

Rear Drive chain excessively tight (6.2.1d)

Nail in rear tyre

Rear suspension bush has slight free play (2.4.A2a(i))

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Brake disc(s) excessively worn (3.2.A1l)

Front mudguard insecure (2.3.7)

Fuel cap does not fasten securely by a positive means (7.2.2b)

Fuel cap does not fasten securely maintaining the sealing arrangement (7.2.2b)

Fuel cap sealing washer missing (7.2.2c)

Nearside Front Direction indicator insecure (1.5.3b)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Offside Front Direction indicator insecure (1.5.3b)

Offside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Rear Direction indicator insecure (1.5.3b)

Rear mono-shock pivot excessively worn (2.4.B.4)

Riders seat insecure (6.2.1a)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)

Steering movement excessively stiff with the wheel raised (2.2.1b)

Chain adjuster locking nuts not tight

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Indicator wireing not secured correctly.

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Tyre worn close to the legal limit (4.1.3(i))